BTS428L2ATMA1 vs BSP742RIXUMA1 Vergleich
Detaillierter Direktvergleich von BTS428L2ATMA1 von Infineon und BSP742RIXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BTS428L2ATMA1 | BSP742RIXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,45 | $0,96 |
| Product Type | Smart High-Side Power Switch | Smart High-Side Power Switch |
| Technology | Smart SIPMOS (vertical N-channel MOSFET with charge pump) | — |
| Number of Channels | 1 | — |
| Input Type | CMOS-compatible, ground-referenced | — |
| On-State Resistance (R_DS(on)) | 50 mOhm (typical) | — |
| Continuous Load Current | 5.8 A | — |
| Betriebsversorgungsspannung | [DATA_NEEDED: nominal and range] | 5 V to 34 V |
| Standby Current | Very low (per datasheet) | — |
| Overvoltage Protection | Load-dump / overvoltage clamp | Yes (including load dump) |
| Overtemperature Protection | Yes, with autorestart | — |
| Diagnostic Feedback | Yes (open-load, short-circuit, overtemperature) | — |
| Gehäuse | PG-TO252-5-11 (DPAK-5, 4 leads + tab) | PG-DSO-8-6 (SOIC-8, 3.90 mm body) |
| Montageart | Surface Mount | Surface Mount |
| Betriebstemperaturbereich | [DATA_NEEDED: min/max] | -40 °C to +150 °C |
| RoHS / Pb-Free | Yes (Green product, Pb-free finish, J-STD-020) | — |
| Soldering | Pb-free reflow per IPC/JEDEC J-STD-020 | — |
| Qualification | Automotive-grade (PROFET family) | — |
| Topologie | — | 1:1 N-Channel High-Side |
| Family | — | miniPROFET |
| Output Current (Nominal) | — | 400 mA |
| RDS(on) Typical at 25°C | — | 250 mΩ |
| Load Dump Tolerance | — | 41 V |
| Reverse Battery Protection | — | -16 V |
| On-State Resistance (max) | — | [DATA_NEEDED: RDS(on) maximum at 25°C] |
| Strombegrenzung | — | [DATA_NEEDED: current limit typical value] |
| Thermisches Abschalten | — | Yes with auto restart |
| Short Circuit Protection | — | Yes |
| Open Load Detection | — | Yes (diagnostic pin) |
| Demagnetization of Inductive Loads | — | Yes (internal) |
| MSL-Level | — | [DATA_NEEDED: MSL rating] |
| RoHS-Status | — | Compliant |