BTS428L2ATMA1 vs BSP742RIXUMA1 比較

詳細並排比較 BTS428L2ATMA1 由 Infineon 與 BSP742RIXUMA1 由 Infineon. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

Infineon
BTS428L2ATMA1 BTS428L2ATMA1 - 5.8A Smart High-Side Switch | Infineon

BTS428L2ATMA1 - 5.8A Smart High-Side Switch | Infineon

BTS428L2ATMA1 ✓ 啟用中

規格比較

參數 BTS428L2ATMA1 BSP742RIXUMA1
品牌 Infineon Infineon
類別 Power MOSFET Drivers Power MOSFET Drivers
生命週期狀態 啟用中 啟用中
Product Type Smart High-Side Power Switch Smart High-Side Power Switch
Technology Smart SIPMOS (vertical N-channel MOSFET with charge pump) —
Number of Channels 1 —
Input Type CMOS-compatible, ground-referenced —
On-State Resistance (R_DS(on)) 50 mOhm (typical) —
Continuous Load Current 5.8 A —
工作電源電壓 [DATA_NEEDED: nominal and range] 5 V to 34 V
Standby Current Very low (per datasheet) —
Overvoltage Protection Load-dump / overvoltage clamp Yes (including load dump)
Overtemperature Protection Yes, with autorestart —
Diagnostic Feedback Yes (open-load, short-circuit, overtemperature) —
封裝 PG-TO252-5-11 (DPAK-5, 4 leads + tab) PG-DSO-8-6 (SOIC-8, 3.90 mm body)
安裝類型 Surface Mount Surface Mount
工作溫度範圍 [DATA_NEEDED: min/max] -40 °C to +150 °C
RoHS / Pb-Free Yes (Green product, Pb-free finish, J-STD-020) —
Soldering Pb-free reflow per IPC/JEDEC J-STD-020 —
Qualification Automotive-grade (PROFET family) —
拓撲 — 1:1 N-Channel High-Side
Family — miniPROFET
Output Current (Nominal) — 400 mA
RDS(on) Typical at 25°C — 250 mΩ
Load Dump Tolerance — 41 V
Reverse Battery Protection — -16 V
On-State Resistance (max) — [DATA_NEEDED: RDS(on) maximum at 25°C]
電流限制 — [DATA_NEEDED: current limit typical value]
過熱關機 — Yes with auto restart
Short Circuit Protection — Yes
Open Load Detection — Yes (diagnostic pin)
Demagnetization of Inductive Loads — Yes (internal)
MSL 等級 — [DATA_NEEDED: MSL rating]
RoHS 狀態 — Compliant

資料表與資源

瀏覽所有產品 建立 BOM 索取報價