BTS51202EKAXUMA1 vs BTG70902EPLXUMA1 Comparison
Detailed side-by-side comparison of BTS51202EKAXUMA1 by Infineon and BTG70902EPLXUMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Infineon
BTG70902EPLXUMA1 - 2A PROFET+2 12V Smart High-Side Switch | Infineon
BTG70902EPLXUMA1 ✓ ActiveSpecification Comparison
| Parameter | BTS51202EKAXUMA1 | BTG70902EPLXUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Power MOSFET Drivers | Power MOSFET Drivers |
| Lifecycle Status | Active | Active |
| Topology | Dual High-Side Switch (2 channels) | — |
| Technology | Smart6 (N-channel vertical MOSFET with charge pump) | — |
| Number of Channels | 2 | 1 |
| On-State Resistance (RDS(on)) | 120 mΩ (typical per channel) | — |
| Continuous Output Current | 2 A per channel (typical 2.5 A) | — |
| Operating Voltage (Vbb) | 8 V to 18 V | — |
| Load Type | Lamps up to 1×10 W, LEDs, resistive/inductive loads | — |
| Package | PG-DSO-14-40-EP (14-pin SOIC with exposed pad) | PG-TSDSO-14 (exposed pad) |
| Mounting Type | Surface Mount | Surface Mount |
| Operating Temperature | -40 °C to +150 °C | — |
| Maximum Power Dissipation | 1800 mW | — |
| Integrated Protection | Over-current, Short-circuit, Over-temperature, Over-voltage, Under-voltage lockout, Reverse battery | — |
| Diagnostic Output | Yes (status feedback pin) | DEN pin (current sense / fault flag) |
| Charge Pump | Integrated | — |
| Automotive Qualified | Yes | — |
| RoHS Status | Compliant | Compliant |
| Product Family | — | PROFET+2 12V |
| Function | — | Smart High-Side Power Switch |
| Input-to-Output Ratio | — | 1:1 |
| Output Configuration | — | N-Channel High-Side |
| Continuous Load Current | — | 2 A |
| Nominal Operating Voltage | — | 12 V (automotive bus) |
| Operating Voltage Range | — | [DATA_NEEDED: Vbb operating range min/max] |
| On-State Resistance (Ron) | — | [DATA_NEEDED: Rdson typ/max in mohm] |
| Current Limit | — | Fixed (value not specified in retrieved data) |
| Protection Features | — | Overcurrent, Short-Circuit, Over-Temperature (latch), Over-Voltage, Under-Voltage Lockout, Reverse Battery |
| Enable Input | — | IN pin (active-high) |
| Channel Select | — | DSEL pin |
| Slew Rate Control | — | Yes (internal, for EMI) |
| Operating Junction Temperature | — | -40 C to +150 C |
| Automotive Qualification | — | AEC-Q100 (PROFET+2 family targeted at automotive) |
| MSL Level | — | [DATA_NEEDED: MSL rating per JEDEC J-STD-020] |