BTS51202EKAXUMA1 vs BTG70902EPLXUMA1 Comparación
Comparación detallada lado a lado de BTS51202EKAXUMA1 por Infineon y BTG70902EPLXUMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Infineon
BTG70902EPLXUMA1 - 2A PROFET+2 12V Smart High-Side Switch | Infineon
BTG70902EPLXUMA1 ✓ ActivoComparación de especificaciones
| Parámetro | BTS51202EKAXUMA1 | BTG70902EPLXUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $1,68 | $0,99 |
| Topología | Dual High-Side Switch (2 channels) | — |
| Technology | Smart6 (N-channel vertical MOSFET with charge pump) | — |
| Number of Channels | 2 | 1 |
| On-State Resistance (RDS(on)) | 120 mΩ (typical per channel) | — |
| Continuous Output Current | 2 A per channel (typical 2.5 A) | — |
| Operating Voltage (Vbb) | 8 V to 18 V | — |
| Load Type | Lamps up to 1×10 W, LEDs, resistive/inductive loads | — |
| Encapsulado | PG-DSO-14-40-EP (14-pin SOIC with exposed pad) | PG-TSDSO-14 (exposed pad) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Temperatura de funcionamiento | -40 °C to +150 °C | — |
| Maximum Power Dissipation | 1800 mW | — |
| Integrated Protection | Over-current, Short-circuit, Over-temperature, Over-voltage, Under-voltage lockout, Reverse battery | — |
| Diagnostic Output | Yes (status feedback pin) | DEN pin (current sense / fault flag) |
| Charge Pump | Integrated | — |
| Automotive Qualified | Yes | — |
| Estado RoHS | Compliant | Compliant |
| Product Family | — | PROFET+2 12V |
| Función | — | Smart High-Side Power Switch |
| Input-to-Output Ratio | — | 1:1 |
| Configuración de salida | — | N-Channel High-Side |
| Continuous Load Current | — | 2 A |
| Nominal Operating Voltage | — | 12 V (automotive bus) |
| Operating Voltage Range | — | [DATA_NEEDED: Vbb operating range min/max] |
| On-State Resistance (Ron) | — | [DATA_NEEDED: Rdson typ/max in mohm] |
| Limitación de corriente | — | Fixed (value not specified in retrieved data) |
| Protection Features | — | Overcurrent, Short-Circuit, Over-Temperature (latch), Over-Voltage, Under-Voltage Lockout, Reverse Battery |
| Enable Input | — | IN pin (active-high) |
| Channel Select | — | DSEL pin |
| Slew Rate Control | — | Yes (internal, for EMI) |
| Temperatura de unión de funcionamiento | — | -40 C to +150 C |
| Automotive Qualification | — | AEC-Q100 (PROFET+2 family targeted at automotive) |
| Nivel MSL | — | [DATA_NEEDED: MSL rating per JEDEC J-STD-020] |