BTS51202EKAXUMA1 vs BTG70902EPLXUMA1 Vergleich
Detaillierter Direktvergleich von BTS51202EKAXUMA1 von Infineon und BTG70902EPLXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Infineon
BTG70902EPLXUMA1 - 2A PROFET+2 12V Smart High-Side Switch | Infineon
BTG70902EPLXUMA1 ✓ AktivSpezifikationsvergleich
| Parameter | BTS51202EKAXUMA1 | BTG70902EPLXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,68 | $0,99 |
| Topologie | Dual High-Side Switch (2 channels) | — |
| Technology | Smart6 (N-channel vertical MOSFET with charge pump) | — |
| Number of Channels | 2 | 1 |
| On-State Resistance (RDS(on)) | 120 mΩ (typical per channel) | — |
| Continuous Output Current | 2 A per channel (typical 2.5 A) | — |
| Operating Voltage (Vbb) | 8 V to 18 V | — |
| Load Type | Lamps up to 1×10 W, LEDs, resistive/inductive loads | — |
| Gehäuse | PG-DSO-14-40-EP (14-pin SOIC with exposed pad) | PG-TSDSO-14 (exposed pad) |
| Montageart | Surface Mount | Surface Mount |
| Betriebstemperatur | -40 °C to +150 °C | — |
| Maximum Power Dissipation | 1800 mW | — |
| Integrated Protection | Over-current, Short-circuit, Over-temperature, Over-voltage, Under-voltage lockout, Reverse battery | — |
| Diagnostic Output | Yes (status feedback pin) | DEN pin (current sense / fault flag) |
| Charge Pump | Integrated | — |
| Automotive Qualified | Yes | — |
| RoHS-Status | Compliant | Compliant |
| Product Family | — | PROFET+2 12V |
| Funktion | — | Smart High-Side Power Switch |
| Input-to-Output Ratio | — | 1:1 |
| Ausgangskonfiguration | — | N-Channel High-Side |
| Continuous Load Current | — | 2 A |
| Nominal Operating Voltage | — | 12 V (automotive bus) |
| Operating Voltage Range | — | [DATA_NEEDED: Vbb operating range min/max] |
| On-State Resistance (Ron) | — | [DATA_NEEDED: Rdson typ/max in mohm] |
| Strombegrenzung | — | Fixed (value not specified in retrieved data) |
| Protection Features | — | Overcurrent, Short-Circuit, Over-Temperature (latch), Over-Voltage, Under-Voltage Lockout, Reverse Battery |
| Enable Input | — | IN pin (active-high) |
| Channel Select | — | DSEL pin |
| Slew Rate Control | — | Yes (internal, for EMI) |
| Betriebs-Sperrschichttemperatur | — | -40 C to +150 C |
| Automotive Qualification | — | AEC-Q100 (PROFET+2 family targeted at automotive) |
| MSL-Level | — | [DATA_NEEDED: MSL rating per JEDEC J-STD-020] |