BTS70041EPZXUMA1 vs BTS70082EPAXUMA1 Comparison
Detailed side-by-side comparison of BTS70041EPZXUMA1 by Infineon and BTS70082EPAXUMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Infineon
BTS70082EPAXUMA1 - 2x 8mΩ 7.5A Smart High-Side Switch | Infineon PROFET
BTS70082EPAXUMA1 ✓ ActiveSpecification Comparison
| Parameter | BTS70041EPZXUMA1 | BTS70082EPAXUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Power MOSFET Drivers | Power MOSFET Drivers |
| Lifecycle Status | Active | Active |
| Manufacturer | Infineon Technologies AG | — |
| Series | PROFET®+2 (Automotive, AEC-Q100) | — |
| Switch Type | High-Side N-Channel Power Switch (1:1) | High-side N-channel MOSFET switch |
| Number of Channels | 1 | 2 |
| Maximum Continuous Load Current | 15 A | — |
| Operating Voltage Range (Vbb) | 3.1 V to 28 V | — |
| Reverse Battery Robustness | -28 V on Vbb | — |
| On-State Resistance R_DS(on) | [DATA_NEEDED: R_DS(on) typical in mΩ] | — |
| Current Limitation | Active, with latch clear via DEN pulse | — |
| Overtemperature Protection | Yes (thermal shutdown with auto-restart) | — |
| Short-Circuit Protection | Yes (current-limit and latch) | — |
| Diagnostic Output | DEN pin (digital/analog fault feedback) | Current-sense (IS) pin, analog/digital |
| Input Pin (IN) | Logic-level control, 3.3 V / 5 V compatible | — |
| Operating Temperature Range (TJ) | -40 °C to +175 °C | — |
| Package | PG-TDSO-14-11 (14-pin, exposed thermal pad) | PG-TSDSO-14-22 (TSSOP-14 EP, 14-pin thermal-pad SMD) |
| Mounting Type | Surface Mount | Surface Mount |
| MSL Level | MSL 2A (4 weeks) | MSL3 (per JEDEC J-STD-020) |
| Qualification | AEC-Q100 (automotive grade) | — |
| Packaging | Tape & Reel | — |
| RoHS Status | Compliant | Compliant |
| Product Family | — | PROFET+2 (12 V, dual channel) |
| On-Resistance (RDS(on)) per channel | — | 16 mΩ typical (8 mΩ channel-on resistance per channel pair) |
| Continuous Load Current per channel | — | 7.5 A |
| Nominal Supply Voltage | — | 12 V |
| Operating Supply Voltage Range | — | 3.1 V to 28 V |
| Load Dump / Transient Tolerance | — | 42 V per ISO 7637-2 |
| Reverse Battery Protection | — | -16 V |
| Standby Current | — | [DATA_NEEDED: standby current uA] |
| Current Sense (IS) Ratio kILIS | — | 5000 (typical) |
| Protection Features | — | Overtemperature shutdown, overcurrent, short to ground, short to VS, open load, ground loss |
| Operating Junction Temperature | — | -40 °C to +150 °C |
| AEC-Q100 Qualification | — | Yes (Automotive Grade) |