BTS70041EPZXUMA1 vs BTS70082EPAXUMA1 비교
다음의 상세 나란히 비교: BTS70041EPZXUMA1 제조: Infineon 및 BTS70082EPAXUMA1 제조: Infineon. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Infineon
BTS70082EPAXUMA1 - 2x 8mΩ 7.5A Smart High-Side Switch | Infineon PROFET
BTS70082EPAXUMA1 ✓ 활성사양 비교
| 파라미터 | BTS70041EPZXUMA1 | BTS70082EPAXUMA1 |
|---|---|---|
| 브랜드 | Infineon | Infineon |
| 카테고리 | Power MOSFET Drivers | Power MOSFET Drivers |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $1.05 | $2.05 |
| Manufacturer | Infineon Technologies AG | — |
| Series | PROFET®+2 (Automotive, AEC-Q100) | — |
| Switch Type | High-Side N-Channel Power Switch (1:1) | High-side N-channel MOSFET switch |
| Number of Channels | 1 | 2 |
| Maximum Continuous Load Current | 15 A | — |
| Operating Voltage Range (Vbb) | 3.1 V to 28 V | — |
| Reverse Battery Robustness | -28 V on Vbb | — |
| On-State Resistance R_DS(on) | [DATA_NEEDED: R_DS(on) typical in mΩ] | — |
| Current Limitation | Active, with latch clear via DEN pulse | — |
| Overtemperature Protection | Yes (thermal shutdown with auto-restart) | — |
| Short-Circuit Protection | Yes (current-limit and latch) | — |
| Diagnostic Output | DEN pin (digital/analog fault feedback) | Current-sense (IS) pin, analog/digital |
| Input Pin (IN) | Logic-level control, 3.3 V / 5 V compatible | — |
| Operating Temperature Range (TJ) | -40 °C to +175 °C | — |
| 패키지 | PG-TDSO-14-11 (14-pin, exposed thermal pad) | PG-TSDSO-14-22 (TSSOP-14 EP, 14-pin thermal-pad SMD) |
| 실장 유형 | Surface Mount | Surface Mount |
| MSL 레벨 | MSL 2A (4 weeks) | MSL3 (per JEDEC J-STD-020) |
| Qualification | AEC-Q100 (automotive grade) | — |
| Packaging | Tape & Reel | — |
| RoHS 상태 | Compliant | Compliant |
| Product Family | — | PROFET+2 (12 V, dual channel) |
| On-Resistance (RDS(on)) per channel | — | 16 mΩ typical (8 mΩ channel-on resistance per channel pair) |
| Continuous Load Current per channel | — | 7.5 A |
| Nominal Supply Voltage | — | 12 V |
| Operating Supply Voltage Range | — | 3.1 V to 28 V |
| Load Dump / Transient Tolerance | — | 42 V per ISO 7637-2 |
| Reverse Battery Protection | — | -16 V |
| Standby Current | — | [DATA_NEEDED: standby current uA] |
| Current Sense (IS) Ratio kILIS | — | 5000 (typical) |
| Protection Features | — | Overtemperature shutdown, overcurrent, short to ground, short to VS, open load, ground loss |
| 동작 접합 온도 | — | -40 °C to +150 °C |
| AEC-Q100 Qualification | — | Yes (Automotive Grade) |