DRV8847PWPR vs DRV8806PWPR Comparison
Detailed side-by-side comparison of DRV8847PWPR by Texas Instruments and DRV8806PWPR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
DRV8847PWPR - 18V 2A Dual H-Bridge Motor Driver | Texas Instruments
DRV8847PWPR ✓ Active
Specification Comparison
| Parameter | DRV8847PWPR | DRV8806PWPR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Motor Drivers | Motor Drivers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $1.32 | $3.20 |
| Motor Driver Type | Dual H-Bridge, Brushed DC / Bipolar Stepper | — |
| Number of H-Bridges | 2 | — |
| Output Configuration | Half-Bridge (independent control) x 4 | Low-side DMOS, open drain |
| Supply Voltage (Operating) | 0 V to 11 V | — |
| Supply Voltage (Absolute Max) | 18 V | — |
| Continuous Output Current per H-Bridge | 1.5 A (with proper PCB thermal design) | — |
| Peak Output Current per H-Bridge | 2 A | — |
| Current Regulation | Yes (internal PWM chopping with sense resistor) | — |
| RDS(on) (HS + LS per FET) | [DATA_NEEDED: RDS(on) per MOSFET] | — |
| Quiescent Current (Typical) | 7.5 mA | — |
| Logic Input Voltage | 1.8 V to 5.5 V | — |
| Operating Temperature Range | -40 C to +125 C | — |
| Package | HTSSOP-16 (PWP) with PowerPAD | HTSSOP-16 (PWP) with PowerPAD |
| Package Thermal Resistance (theta_JB) | [DATA_NEEDED: theta_JB] | — |
| Mounting Type | Surface Mount | Surface Mount |
| Protection Features | OCP, OVP, OTP, UVLO | — |
| MSL Level | [DATA_NEEDED: MSL level] | 2 |
| RoHS Status | Compliant | Compliant |
| Number of Channels | — | 4 (quad low-side) |
| Supply Voltage (VM) | — | 8.2 V to 38 V |
| Continuous Output Current per Channel | — | 2 A |
| Peak Output Current per Channel | — | 3 A |
| RDS(on) per Channel | — | 200 mOhm (typical) |
| Interface | — | SPI (serial, 3.3 V logic) |
| Open-Load Detection | — | Yes, via SPI |
| Overcurrent Protection | — | Yes, per channel |
| Thermal Shutdown | — | Yes |
| Undervoltage Lockout | — | Yes |
| Built-in Clamp Diodes | — | Yes (freewheeling) |
| Operating Temperature | — | -40C to +85C |