DRV8847PWPR vs DRV8806PWPR Comparaison
Comparaison détaillée côte à côte de DRV8847PWPR par Texas Instruments et DRV8806PWPR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
DRV8847PWPR - 18V 2A Dual H-Bridge Motor Driver | Texas Instruments
DRV8847PWPR ✓ Actif
Comparaison des spécifications
| Paramètre | DRV8847PWPR | DRV8806PWPR |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Motor Drivers | Motor Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,32 | $3,20 |
| Motor Driver Type | Dual H-Bridge, Brushed DC / Bipolar Stepper | — |
| Number of H-Bridges | 2 | — |
| Configuration de sortie | Half-Bridge (independent control) x 4 | Low-side DMOS, open drain |
| Supply Voltage (Operating) | 0 V to 11 V | — |
| Supply Voltage (Absolute Max) | 18 V | — |
| Continuous Output Current per H-Bridge | 1.5 A (with proper PCB thermal design) | — |
| Peak Output Current per H-Bridge | 2 A | — |
| Current Regulation | Yes (internal PWM chopping with sense resistor) | — |
| RDS(on) (HS + LS per FET) | [DATA_NEEDED: RDS(on) per MOSFET] | — |
| Quiescent Current (Typical) | 7.5 mA | — |
| Logic Input Voltage | 1.8 V to 5.5 V | — |
| Plage de température de fonctionnement | -40 C to +125 C | — |
| Boîtier | HTSSOP-16 (PWP) with PowerPAD | HTSSOP-16 (PWP) with PowerPAD |
| Package Thermal Resistance (theta_JB) | [DATA_NEEDED: theta_JB] | — |
| Type de montage | Surface Mount | Surface Mount |
| Protection Features | OCP, OVP, OTP, UVLO | — |
| Niveau MSL | [DATA_NEEDED: MSL level] | 2 |
| Statut RoHS | Compliant | Compliant |
| Number of Channels | — | 4 (quad low-side) |
| Supply Voltage (VM) | — | 8.2 V to 38 V |
| Continuous Output Current per Channel | — | 2 A |
| Peak Output Current per Channel | — | 3 A |
| RDS(on) per Channel | — | 200 mOhm (typical) |
| Interface | — | SPI (serial, 3.3 V logic) |
| Open-Load Detection | — | Yes, via SPI |
| Protection contre les surintensités | — | Yes, per channel |
| Arrêt thermique | — | Yes |
| Undervoltage Lockout | — | Yes |
| Built-in Clamp Diodes | — | Yes (freewheeling) |
| Température de fonctionnement | — | -40C to +85C |