DRV8847PWPR vs DRV8806PWPR Comparación
Comparación detallada lado a lado de DRV8847PWPR por Texas Instruments y DRV8806PWPR por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
DRV8847PWPR - 18V 2A Dual H-Bridge Motor Driver | Texas Instruments
DRV8847PWPR ✓ Activo
Comparación de especificaciones
| Parámetro | DRV8847PWPR | DRV8806PWPR |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Motor Drivers | Motor Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $1,32 | $3,20 |
| Motor Driver Type | Dual H-Bridge, Brushed DC / Bipolar Stepper | — |
| Number of H-Bridges | 2 | — |
| Configuración de salida | Half-Bridge (independent control) x 4 | Low-side DMOS, open drain |
| Supply Voltage (Operating) | 0 V to 11 V | — |
| Supply Voltage (Absolute Max) | 18 V | — |
| Continuous Output Current per H-Bridge | 1.5 A (with proper PCB thermal design) | — |
| Peak Output Current per H-Bridge | 2 A | — |
| Current Regulation | Yes (internal PWM chopping with sense resistor) | — |
| RDS(on) (HS + LS per FET) | [DATA_NEEDED: RDS(on) per MOSFET] | — |
| Quiescent Current (Typical) | 7.5 mA | — |
| Logic Input Voltage | 1.8 V to 5.5 V | — |
| Rango de temperatura de funcionamiento | -40 C to +125 C | — |
| Encapsulado | HTSSOP-16 (PWP) with PowerPAD | HTSSOP-16 (PWP) with PowerPAD |
| Package Thermal Resistance (theta_JB) | [DATA_NEEDED: theta_JB] | — |
| Tipo de montaje | Surface Mount | Surface Mount |
| Protection Features | OCP, OVP, OTP, UVLO | — |
| Nivel MSL | [DATA_NEEDED: MSL level] | 2 |
| Estado RoHS | Compliant | Compliant |
| Number of Channels | — | 4 (quad low-side) |
| Supply Voltage (VM) | — | 8.2 V to 38 V |
| Continuous Output Current per Channel | — | 2 A |
| Peak Output Current per Channel | — | 3 A |
| RDS(on) per Channel | — | 200 mOhm (typical) |
| Interfaz | — | SPI (serial, 3.3 V logic) |
| Open-Load Detection | — | Yes, via SPI |
| Protección contra sobrecorriente | — | Yes, per channel |
| Apagado térmico | — | Yes |
| Undervoltage Lockout | — | Yes |
| Built-in Clamp Diodes | — | Yes (freewheeling) |
| Temperatura de funcionamiento | — | -40C to +85C |