DRV8886ATPWPR vs DRV8873HPWPR Comparison
Detailed side-by-side comparison of DRV8886ATPWPR by Texas Instruments and DRV8873HPWPR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
DRV8886ATPWPR - 37V 2A Stepper Driver w/ AutoTune | Texas Instruments
DRV8886ATPWPR ✓ ActiveTexas Instruments
DRV8873HPWPR - 40V 10A H-Bridge Motor Driver | Texas Instruments
DRV8873HPWPR ✓ ActiveSpecification Comparison
| Parameter | DRV8886ATPWPR | DRV8873HPWPR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Motor Drivers | Motor Drivers |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $1.78 | $1.86 |
| Motor Type | Bipolar stepper (2-phase) | Brushed DC |
| Number of Half-Bridges | 4 (2 H-bridges) | — |
| Operating Supply Voltage (VM) | 8 V to 37 V | — |
| Maximum Full-Scale Output Current | 2 A | — |
| RMS Output Current (24 V, TA = 25 C) | 1.4 A | — |
| Logic Supply Voltage (VCC) | 3 V to 5.5 V | — |
| Microstepping Levels | 1, 2, 4, 8, 16, 32 (up to 1/16 native) | — |
| Current Sensing | Integrated (no external sense resistors) | — |
| Decay Mode | AutoTune (smart-tune, adaptive mixed decay) | — |
| Control Interface | STEP / DIR (indexer built-in) | PH/EN (hardware) or PWM, selectable via MODE |
| RDS(on) per FET (typ) | 750 mOhm (HS + LS, TA = 25 C) per TI datasheet | — |
| Protection Features | OCP, OTP/TSD, UVLO, open-load detect, fault flag (nFAULT) | — |
| Sleep Current | [DATA_NEEDED: nSLEEP quiescent current] | — |
| Operating Temperature | -40 C to +125 C | -40 C to +125 C |
| Package | HTSSOP-24 (PWP) with PowerPAD, 7.8 mm x 4.4 mm | 24-pin HTSSOP (PWP) with PowerPAD |
| Mounting Type | Surface Mount | Surface Mount |
| MSL Level | 2 | 3 (168 hr / 260 C) |
| RoHS / Pb-Free | Yes (compliant) | — |
| Topology | — | H-Bridge (4 N-channel MOSFETs) |
| Supply Voltage (VM) | — | 4.5 V to 38 V |
| Absolute Maximum VM | — | 40 V |
| Peak Output Current | — | 10 A |
| Continuous Output Current | — | 3.5 A (with proper PCB thermal design) |
| RDS(on) per HS+LS FET | — | [DATA_NEEDED: typical mOhm at 25 C] |
| Integrated Current Sensing | — | Yes (IPROPI analog output) |
| Current Regulation | — | Yes (Smart-tune or fixed off-time) |
| RoHS Status | — | Compliant |
| AEC-Q100 | — | Not qualified (use DRV8873-Q1 for automotive) |