DRV8886ATPWPR vs DRV8873HPWPR Comparaison
Comparaison détaillée côte à côte de DRV8886ATPWPR par Texas Instruments et DRV8873HPWPR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
DRV8886ATPWPR - 37V 2A Stepper Driver w/ AutoTune | Texas Instruments
DRV8886ATPWPR ✓ ActifTexas Instruments
DRV8873HPWPR - 40V 10A H-Bridge Motor Driver | Texas Instruments
DRV8873HPWPR ✓ ActifComparaison des spécifications
| Paramètre | DRV8886ATPWPR | DRV8873HPWPR |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Motor Drivers | Motor Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,78 | $1,86 |
| Motor Type | Bipolar stepper (2-phase) | Brushed DC |
| Number of Half-Bridges | 4 (2 H-bridges) | — |
| Operating Supply Voltage (VM) | 8 V to 37 V | — |
| Maximum Full-Scale Output Current | 2 A | — |
| RMS Output Current (24 V, TA = 25 C) | 1.4 A | — |
| Logic Supply Voltage (VCC) | 3 V to 5.5 V | — |
| Microstepping Levels | 1, 2, 4, 8, 16, 32 (up to 1/16 native) | — |
| Current Sensing | Integrated (no external sense resistors) | — |
| Decay Mode | AutoTune (smart-tune, adaptive mixed decay) | — |
| Control Interface | STEP / DIR (indexer built-in) | PH/EN (hardware) or PWM, selectable via MODE |
| RDS(on) per FET (typ) | 750 mOhm (HS + LS, TA = 25 C) per TI datasheet | — |
| Protection Features | OCP, OTP/TSD, UVLO, open-load detect, fault flag (nFAULT) | — |
| Sleep Current | [DATA_NEEDED: nSLEEP quiescent current] | — |
| Température de fonctionnement | -40 C to +125 C | -40 C to +125 C |
| Boîtier | HTSSOP-24 (PWP) with PowerPAD, 7.8 mm x 4.4 mm | 24-pin HTSSOP (PWP) with PowerPAD |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | 2 | 3 (168 hr / 260 C) |
| RoHS / Pb-Free | Yes (compliant) | — |
| Topologie | — | H-Bridge (4 N-channel MOSFETs) |
| Supply Voltage (VM) | — | 4.5 V to 38 V |
| Absolute Maximum VM | — | 40 V |
| Peak Output Current | — | 10 A |
| Continuous Output Current | — | 3.5 A (with proper PCB thermal design) |
| RDS(on) per HS+LS FET | — | [DATA_NEEDED: typical mOhm at 25 C] |
| Integrated Current Sensing | — | Yes (IPROPI analog output) |
| Current Regulation | — | Yes (Smart-tune or fixed off-time) |
| Statut RoHS | — | Compliant |
| AEC-Q100 | — | Not qualified (use DRV8873-Q1 for automotive) |