DRV8886ATPWPR vs DRV8873HPWPR Vergleich
Detaillierter Direktvergleich von DRV8886ATPWPR von Texas Instruments und DRV8873HPWPR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
DRV8886ATPWPR - 37V 2A Stepper Driver w/ AutoTune | Texas Instruments
DRV8886ATPWPR ✓ AktivTexas Instruments
DRV8873HPWPR - 40V 10A H-Bridge Motor Driver | Texas Instruments
DRV8873HPWPR ✓ AktivSpezifikationsvergleich
| Parameter | DRV8886ATPWPR | DRV8873HPWPR |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Motor Drivers | Motor Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,78 | $1,86 |
| Motor Type | Bipolar stepper (2-phase) | Brushed DC |
| Number of Half-Bridges | 4 (2 H-bridges) | — |
| Operating Supply Voltage (VM) | 8 V to 37 V | — |
| Maximum Full-Scale Output Current | 2 A | — |
| RMS Output Current (24 V, TA = 25 C) | 1.4 A | — |
| Logic Supply Voltage (VCC) | 3 V to 5.5 V | — |
| Microstepping Levels | 1, 2, 4, 8, 16, 32 (up to 1/16 native) | — |
| Current Sensing | Integrated (no external sense resistors) | — |
| Decay Mode | AutoTune (smart-tune, adaptive mixed decay) | — |
| Control Interface | STEP / DIR (indexer built-in) | PH/EN (hardware) or PWM, selectable via MODE |
| RDS(on) per FET (typ) | 750 mOhm (HS + LS, TA = 25 C) per TI datasheet | — |
| Protection Features | OCP, OTP/TSD, UVLO, open-load detect, fault flag (nFAULT) | — |
| Sleep Current | [DATA_NEEDED: nSLEEP quiescent current] | — |
| Betriebstemperatur | -40 C to +125 C | -40 C to +125 C |
| Gehäuse | HTSSOP-24 (PWP) with PowerPAD, 7.8 mm x 4.4 mm | 24-pin HTSSOP (PWP) with PowerPAD |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | 2 | 3 (168 hr / 260 C) |
| RoHS / Pb-Free | Yes (compliant) | — |
| Topologie | — | H-Bridge (4 N-channel MOSFETs) |
| Supply Voltage (VM) | — | 4.5 V to 38 V |
| Absolute Maximum VM | — | 40 V |
| Peak Output Current | — | 10 A |
| Continuous Output Current | — | 3.5 A (with proper PCB thermal design) |
| RDS(on) per HS+LS FET | — | [DATA_NEEDED: typical mOhm at 25 C] |
| Integrated Current Sensing | — | Yes (IPROPI analog output) |
| Current Regulation | — | Yes (Smart-tune or fixed off-time) |
| RoHS-Status | — | Compliant |
| AEC-Q100 | — | Not qualified (use DRV8873-Q1 for automotive) |