EPC1PC8CC vs EPC1PC8-NW Comparison

Detailed side-by-side comparison of EPC1PC8CC by Intel and EPC1PC8-NW by Intel. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.

Specification Comparison

Parameter EPC1PC8CC EPC1PC8-NW
Brand Intel Intel
Category Memory ICs Memory ICs
Lifecycle Status Obsolete Active
Stock Status In Stock In Stock
Unit Price (USD) $9.95 $4.30
Memory Size 1 Mbit (1,048,576 bits) 1 Mbit (1,046,496 bits)
Memory Type EPROM (OTP, UV-erasable window optional) β€”
Function FPGA Configuration PROM β€”
Configuration Interface Altera Passive Serial (PS), 4-wire (nSTATUS, nCONFIG, DCLK, DATA0) β€”
Supply Voltage VCC 3.0 V to 3.6 V (typical 3.3 V) β€”
Maximum DCLK Frequency 17.6 MHz (17.6 Mb/s effective bitstream rate) β€”
Operating Temperature Range [DATA_NEEDED: full industrial range from datasheet] β€”
Package PDIP-8 (Plastic DIP, 8-pin, 0.1" pitch) 8-pin PDIP (300-mil body, through-hole)
Mounting Type Through-Hole (DIP socketable) β€”
Cascade Support Not supported in DIP-8 package (nCASC pin not exposed) β€”
Programming Interface JTAG via Altera Quartus / Quartus Prime ByteBlaster β€”
Error Detection Built-in CRC during configuration transfer β€”
MSL Level 1 (unlimited floor life) MSL 2 (per JEDEC J-STD-020)
Lead-Free / RoHS Not lead-free (legacy Altera/Intel PC8 suffix is Sn-Pb finish); RoHS non-compliant variant β€”
Compatible FPGA Families ACEX 1K, APEX 20K, APEX II, Cyclone, Cyclone II, FLEX 10K, FLEX 6000, FLEX 8000, MAX 7000B/AE/S, MAX 9000, Mercury, Stratix, Stratix II, Arria FLEX 10K, APEX 20K, Mercury, Cyclone, MAX 7000S/AE/B
Pin Count 8 8
Product Type β€” OTP Configuration PROM (one-time programmable)
Interface β€” Altera / Intel serial configuration (DATA, DCLK, nCONFIG, nSTATUS, CONF_DONE)
Supply Voltage (VCC) β€” 3.0 V to 5.5 V (3.3 V or 5 V nominal)
Configuration Mode Support β€” Passive Serial (PS) for FLEX, APEX, Mercury, Cyclone families
Oscillator β€” Internal ring oscillator (EPC1/EPC1441 only; EPC2 uses external clock)
JTAG Boundary-Scan Support β€” No (EPC2 family only)
Programming Method β€” Altera ByteBlasterMV, BitBlaster, or compatible USB-Blaster via Quartus / MAX+PLUS II
Lead Finish β€” Pb-free matte tin (JEDEC J-STD-020 compliant)
Operating Temperature β€” 0C to +70C (commercial)
RoHS Status β€” Compliant (Pb-free -NW suffix)
Manufacturer β€” Intel (formerly Altera Corporation)

Datasheets & Resources

Browse All Products Create BOM Request Quote