EPC1PC8CC vs EPC1PC8-NW So sánh

So sánh chi tiết song song của EPC1PC8CC bằng Intel và EPC1PC8-NW bằng Intel. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

So sánh thông số kỹ thuật

Tham số EPC1PC8CC EPC1PC8-NW
Thương hiệu Intel Intel
Danh mục Memory ICs Memory ICs
Trạng thái vòng đời Obsolete Hoạt động
Kích thước bộ nhớ 1 Mbit (1,048,576 bits) 1 Mbit (1,046,496 bits)
Kiểu bộ nhớ EPROM (OTP, UV-erasable window optional) —
Chức năng FPGA Configuration PROM —
Configuration Interface Altera Passive Serial (PS), 4-wire (nSTATUS, nCONFIG, DCLK, DATA0) —
Supply Voltage VCC 3.0 V to 3.6 V (typical 3.3 V) —
Maximum DCLK Frequency 17.6 MHz (17.6 Mb/s effective bitstream rate) —
Khoảng nhiệt độ hoạt động [DATA_NEEDED: full industrial range from datasheet] —
Hộp PDIP-8 (Plastic DIP, 8-pin, 0.1" pitch) 8-pin PDIP (300-mil body, through-hole)
Kiểu lắp đặt Through-Hole (DIP socketable) —
Cascade Support Not supported in DIP-8 package (nCASC pin not exposed) —
Programming Interface JTAG via Altera Quartus / Quartus Prime ByteBlaster —
Error Detection Built-in CRC during configuration transfer —
Cấp MSL 1 (unlimited floor life) MSL 2 (per JEDEC J-STD-020)
Lead-Free / RoHS Not lead-free (legacy Altera/Intel PC8 suffix is Sn-Pb finish); RoHS non-compliant variant —
Compatible FPGA Families ACEX 1K, APEX 20K, APEX II, Cyclone, Cyclone II, FLEX 10K, FLEX 6000, FLEX 8000, MAX 7000B/AE/S, MAX 9000, Mercury, Stratix, Stratix II, Arria FLEX 10K, APEX 20K, Mercury, Cyclone, MAX 7000S/AE/B
Số chân 8 8
Product Type — OTP Configuration PROM (one-time programmable)
Giao diện — Altera / Intel serial configuration (DATA, DCLK, nCONFIG, nSTATUS, CONF_DONE)
Supply Voltage (VCC) — 3.0 V to 5.5 V (3.3 V or 5 V nominal)
Configuration Mode Support — Passive Serial (PS) for FLEX, APEX, Mercury, Cyclone families
Oscillator — Internal ring oscillator (EPC1/EPC1441 only; EPC2 uses external clock)
JTAG Boundary-Scan Support — No (EPC2 family only)
Programming Method — Altera ByteBlasterMV, BitBlaster, or compatible USB-Blaster via Quartus / MAX+PLUS II
Lead Finish — Pb-free matte tin (JEDEC J-STD-020 compliant)
Nhiệt độ hoạt động — 0C to +70C (commercial)
Trạng thái RoHS — Compliant (Pb-free -NW suffix)
Manufacturer — Intel (formerly Altera Corporation)

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá