EPC1PC8CC vs EPC1PC8-NW Comparaison
Comparaison détaillée côte à côte de EPC1PC8CC par Intel et EPC1PC8-NW par Intel. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | EPC1PC8CC | EPC1PC8-NW |
|---|---|---|
| Marque | Intel | Intel |
| Catégorie | Memory ICs | Memory ICs |
| Statut du cycle de vie | Obsolete | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $9,95 | $4,30 |
| Taille de mémoire | 1 Mbit (1,048,576 bits) | 1 Mbit (1,046,496 bits) |
| Type de mémoire | EPROM (OTP, UV-erasable window optional) | — |
| Fonction | FPGA Configuration PROM | — |
| Configuration Interface | Altera Passive Serial (PS), 4-wire (nSTATUS, nCONFIG, DCLK, DATA0) | — |
| Supply Voltage VCC | 3.0 V to 3.6 V (typical 3.3 V) | — |
| Maximum DCLK Frequency | 17.6 MHz (17.6 Mb/s effective bitstream rate) | — |
| Plage de température de fonctionnement | [DATA_NEEDED: full industrial range from datasheet] | — |
| Boîtier | PDIP-8 (Plastic DIP, 8-pin, 0.1" pitch) | 8-pin PDIP (300-mil body, through-hole) |
| Type de montage | Through-Hole (DIP socketable) | — |
| Cascade Support | Not supported in DIP-8 package (nCASC pin not exposed) | — |
| Programming Interface | JTAG via Altera Quartus / Quartus Prime ByteBlaster | — |
| Error Detection | Built-in CRC during configuration transfer | — |
| Niveau MSL | 1 (unlimited floor life) | MSL 2 (per JEDEC J-STD-020) |
| Lead-Free / RoHS | Not lead-free (legacy Altera/Intel PC8 suffix is Sn-Pb finish); RoHS non-compliant variant | — |
| Compatible FPGA Families | ACEX 1K, APEX 20K, APEX II, Cyclone, Cyclone II, FLEX 10K, FLEX 6000, FLEX 8000, MAX 7000B/AE/S, MAX 9000, Mercury, Stratix, Stratix II, Arria | FLEX 10K, APEX 20K, Mercury, Cyclone, MAX 7000S/AE/B |
| Nombre de broches | 8 | 8 |
| Product Type | — | OTP Configuration PROM (one-time programmable) |
| Interface | — | Altera / Intel serial configuration (DATA, DCLK, nCONFIG, nSTATUS, CONF_DONE) |
| Supply Voltage (VCC) | — | 3.0 V to 5.5 V (3.3 V or 5 V nominal) |
| Configuration Mode Support | — | Passive Serial (PS) for FLEX, APEX, Mercury, Cyclone families |
| Oscillator | — | Internal ring oscillator (EPC1/EPC1441 only; EPC2 uses external clock) |
| JTAG Boundary-Scan Support | — | No (EPC2 family only) |
| Programming Method | — | Altera ByteBlasterMV, BitBlaster, or compatible USB-Blaster via Quartus / MAX+PLUS II |
| Lead Finish | — | Pb-free matte tin (JEDEC J-STD-020 compliant) |
| Température de fonctionnement | — | 0C to +70C (commercial) |
| Statut RoHS | — | Compliant (Pb-free -NW suffix) |
| Manufacturer | — | Intel (formerly Altera Corporation) |