ICS542M vs ICS514M Comparison
Detailed side-by-side comparison of ICS542M by Renesas Electronics and ICS514M by Renesas Electronics. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | ICS542M | ICS514M |
|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics |
| Category | Clock & Timing | Clock & Timing |
| Lifecycle Status | Obsolete | Active |
| Device Type | Clock fanout buffer and divider IC | Clock Generator, Fanout Distribution IC |
| Maximum Input Frequency | 156 MHz | — |
| Output Configuration | 1:2 | — |
| Available Divide Ratios | 2, 4, 6, 8, 12, or 16 | — |
| Input Logic | CMOS | — |
| Output Logic | 3-State CMOS | — |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V |
| Package | 8-SOIC, 0.154 inch (3.90 mm) width | 8-SOIC (0.154 inch, 3.90 mm width) |
| Mounting Type | Surface Mount | Surface Mount |
| Category | Clock/Timing, Clock Buffer and Driver | — |
| Lifecycle Status | Obsolete | — |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | 0°C to 70°C |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Output Rise Time | [DATA_NEEDED: output rise time] | — |
| Output Fall Time | [DATA_NEEDED: output fall time] | — |
| Output Jitter | [DATA_NEEDED: output jitter] | — |
| Output Duty Cycle | [DATA_NEEDED: output duty cycle] | — |
| Operating Current | [DATA_NEEDED: operating current] | — |
| Quiescent Current | [DATA_NEEDED: quiescent current] | [DATA_NEEDED: quiescent current] |
| Input High Voltage | [DATA_NEEDED: input high voltage] | — |
| Input Low Voltage | [DATA_NEEDED: input low voltage] | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| PLL Architecture | — | Single PLL |
| Maximum Output Frequency | — | 140 MHz |
| Number of Outputs | — | 1 |
| Supported Reference Input | — | 14.31818 MHz crystal or clock input |
| Series | — | LOCO |
| PLL Disable Behavior | — | CLK output stops low when S1 = S0 = 0 |
| Reference Output During PLL Disable | — | Crystal oscillator and REF output remain active |
| Output Configuration Control | — | S1 and S0 control inputs |
| Input Pin Designation | — | I = Input; TI = Tri-Level Input; O = Output; P = Power Supply Connection |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Clock Output Jitter | — | [DATA_NEEDED: clock output jitter] |
| Clock Output Rise Time | — | [DATA_NEEDED: clock output rise time] |
| Clock Output Fall Time | — | [DATA_NEEDED: clock output fall time] |