ICS542M vs ICS514M مقایسه
مقایسه دقیق کنار به کنار ICS542M توسط Renesas Electronics و ICS514M توسط Renesas Electronics. مشخصات کلیدی، پارامترهای الکتریکی، بسته‌بندی، وضعیت چرخه عمر، قیمت‌گذاری و موجودی را مقایسه کنید تا بهترین قطعه را برای نیازهای طراحی خود تعیین کنید.
مقایسه مشخصات
| پارامتر | ICS542M | ICS514M |
|---|---|---|
| برند | Renesas Electronics | Renesas Electronics |
| دسته‌بندی | Clock & Timing | Clock & Timing |
| وضعیت چرخه عمر | Obsolete | فعال |
| Device Type | Clock fanout buffer and divider IC | Clock Generator, Fanout Distribution IC |
| Maximum Input Frequency | 156 MHz | — |
| پیکربندی خروجی | 1:2 | — |
| Available Divide Ratios | 2, 4, 6, 8, 12, or 16 | — |
| Input Logic | CMOS | — |
| Output Logic | 3-State CMOS | — |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V |
| بسته‌بندی | 8-SOIC, 0.154 inch (3.90 mm) width | 8-SOIC (0.154 inch, 3.90 mm width) |
| نوع نصب | Surface Mount | Surface Mount |
| دسته‌بندی | Clock/Timing, Clock Buffer and Driver | — |
| وضعیت چرخه عمر | Obsolete | — |
| محدوده دمای کاری | [DATA_NEEDED: operating temperature range] | 0°C to 70°C |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Output Rise Time | [DATA_NEEDED: output rise time] | — |
| Output Fall Time | [DATA_NEEDED: output fall time] | — |
| Output Jitter | [DATA_NEEDED: output jitter] | — |
| Output Duty Cycle | [DATA_NEEDED: output duty cycle] | — |
| Operating Current | [DATA_NEEDED: operating current] | — |
| جریان سکون | [DATA_NEEDED: quiescent current] | [DATA_NEEDED: quiescent current] |
| Input High Voltage | [DATA_NEEDED: input high voltage] | — |
| Input Low Voltage | [DATA_NEEDED: input low voltage] | — |
| وضعیت RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| PLL Architecture | — | Single PLL |
| Maximum Output Frequency | — | 140 MHz |
| تعداد خروجی‌ها | — | 1 |
| Supported Reference Input | — | 14.31818 MHz crystal or clock input |
| Series | — | LOCO |
| PLL Disable Behavior | — | CLK output stops low when S1 = S0 = 0 |
| Reference Output During PLL Disable | — | Crystal oscillator and REF output remain active |
| Output Configuration Control | — | S1 and S0 control inputs |
| Input Pin Designation | — | I = Input; TI = Tri-Level Input; O = Output; P = Power Supply Connection |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Clock Output Jitter | — | [DATA_NEEDED: clock output jitter] |
| Clock Output Rise Time | — | [DATA_NEEDED: clock output rise time] |
| Clock Output Fall Time | — | [DATA_NEEDED: clock output fall time] |