ICS542M vs ICS514M Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci ICS542M disebabkan oleh Renesas Electronics dan ICS514M disebabkan oleh Renesas Electronics. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | ICS542M | ICS514M |
|---|---|---|
| Merek | Renesas Electronics | Renesas Electronics |
| Kategori | Clock & Timing | Clock & Timing |
| Status Lingkungan Hidup | Obsolete | Aktif |
| Device Type | Clock fanout buffer and divider IC | Clock Generator, Fanout Distribution IC |
| Maximum Input Frequency | 156 MHz | — |
| Konfigurasi Output | 1:2 | — |
| Available Divide Ratios | 2, 4, 6, 8, 12, or 16 | — |
| Input Logic | CMOS | — |
| Output Logic | 3-State CMOS | — |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V |
| Kemasan | 8-SOIC, 0.154 inch (3.90 mm) width | 8-SOIC (0.154 inch, 3.90 mm width) |
| Jenis Pemasangan | Surface Mount | Surface Mount |
| Kategori | Clock/Timing, Clock Buffer and Driver | — |
| Status Lingkungan Hidup | Obsolete | — |
| Gambaran Suhu Operasi | [DATA_NEEDED: operating temperature range] | 0°C to 70°C |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Output Rise Time | [DATA_NEEDED: output rise time] | — |
| Output Fall Time | [DATA_NEEDED: output fall time] | — |
| Output Jitter | [DATA_NEEDED: output jitter] | — |
| Output Duty Cycle | [DATA_NEEDED: output duty cycle] | — |
| Operating Current | [DATA_NEEDED: operating current] | — |
| Arus Dalam Tentera | [DATA_NEEDED: quiescent current] | [DATA_NEEDED: quiescent current] |
| Input High Voltage | [DATA_NEEDED: input high voltage] | — |
| Input Low Voltage | [DATA_NEEDED: input low voltage] | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| PLL Architecture | — | Single PLL |
| Maximum Output Frequency | — | 140 MHz |
| Bilangan Output | — | 1 |
| Supported Reference Input | — | 14.31818 MHz crystal or clock input |
| Series | — | LOCO |
| PLL Disable Behavior | — | CLK output stops low when S1 = S0 = 0 |
| Reference Output During PLL Disable | — | Crystal oscillator and REF output remain active |
| Output Configuration Control | — | S1 and S0 control inputs |
| Input Pin Designation | — | I = Input; TI = Tri-Level Input; O = Output; P = Power Supply Connection |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Clock Output Jitter | — | [DATA_NEEDED: clock output jitter] |
| Clock Output Rise Time | — | [DATA_NEEDED: clock output rise time] |
| Clock Output Fall Time | — | [DATA_NEEDED: clock output fall time] |