INA101AM vs INA101SM Comparison
Detailed side-by-side comparison of INA101AM by Texas Instruments and INA101SM by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
INA101AM - Very High Accuracy Instrumentation Amplifier | Texas Instruments
INA101AM ✓ ActiveSpecification Comparison
| Parameter | INA101AM | INA101SM |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Unknown |
| Product Type | Instrumentation Amplifier | Very high accuracy instrumentation amplifier |
| Number of Channels | 1 channel | — |
| Architecture | Three precision operational amplifiers with laser-trimmed metal-film resistors | — |
| Input Type | Differential | — |
| Supply Voltage Range | Approximately ±5 V to ±20 V; exact operating limits are [DATA_NEEDED: supply voltage range] | — |
| Maximum Supply Voltage | ±20 V | — |
| Offset Voltage | 25 mV maximum | — |
| Input Drift | 0.25 mV/°C maximum | — |
| Nonlinearity | 0.002% | — |
| Noise Density | 13 nV/√Hz | — |
| Common-Mode Rejection Ratio | 106 dB at 60 Hz | — |
| Input Impedance | 10 GΩ | — |
| Bandwidth | Approximately 300 kHz | — |
| Package | TO-100-10 | TO-100-10, through-hole |
| Mounting Type | Through-hole | Through-hole |
| Application Areas | Strain gauges, thermocouples, RTDs, remote sensors, and general-purpose data acquisition | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Number of Circuits | — | 1 circuit |
| Internal Architecture | — | 3 precision operational amplifiers with laser-trimmed metal-film resistors |
| Maximum Input Offset Voltage | — | 25 uV max |
| Maximum Input Drift | — | 0.25 uV/°C max |
| Low Nonlinearity | — | 0.002% |
| Input Noise Density | — | 13 nV/√Hz |
| High Common-Mode Rejection | — | Specified at 60 Hz |
| High Input Impedance | — | 10^10 ohm |
| Minimum Dual Supply Voltage | — | ±5 V |
| Typical Dual Supply Voltage | — | ±15 V |
| Maximum Dual Supply Voltage | — | ±20 V |
| Maximum Power Dissipation | — | 600 mW |
| Process Technology | — | Monolithic integrated circuit |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |