INA101AM vs INA101SM مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ INA101AM بواسطة Texas Instruments و INA101SM بواسطة Texas Instruments. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Texas Instruments
INA101AM - Very High Accuracy Instrumentation Amplifier | Texas Instruments
INA101AM ✓ نشطمقارنة المواصفات
| المعامل | INA101AM | INA101SM |
|---|---|---|
| العلامة التجارية | Texas Instruments | Texas Instruments |
| الفئة | Amplifier ICs | Amplifier ICs |
| حالة دورة الحياة | نشط | Unknown |
| Product Type | Instrumentation Amplifier | Very high accuracy instrumentation amplifier |
| Number of Channels | 1 channel | — |
| Architecture | Three precision operational amplifiers with laser-trimmed metal-film resistors | — |
| Input Type | Differential | — |
| Supply Voltage Range | Approximately ±5 V to ±20 V; exact operating limits are [DATA_NEEDED: supply voltage range] | — |
| Maximum Supply Voltage | ±20 V | — |
| Offset Voltage | 25 mV maximum | — |
| Input Drift | 0.25 mV/°C maximum | — |
| Nonlinearity | 0.002% | — |
| كثافة الضجيج | 13 nV/√Hz | — |
| Common-Mode Rejection Ratio | 106 dB at 60 Hz | — |
| Input Impedance | 10 GΩ | — |
| Bandwidth | Approximately 300 kHz | — |
| العلبة | TO-100-10 | TO-100-10, through-hole |
| نوع التركيب | Through-hole | Through-hole |
| Application Areas | Strain gauges, thermocouples, RTDs, remote sensors, and general-purpose data acquisition | — |
| حالة RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Number of Circuits | — | 1 circuit |
| Internal Architecture | — | 3 precision operational amplifiers with laser-trimmed metal-film resistors |
| Maximum Input Offset Voltage | — | 25 uV max |
| Maximum Input Drift | — | 0.25 uV/°C max |
| Low Nonlinearity | — | 0.002% |
| Input Noise Density | — | 13 nV/√Hz |
| High Common-Mode Rejection | — | Specified at 60 Hz |
| High Input Impedance | — | 10^10 ohm |
| Minimum Dual Supply Voltage | — | ±5 V |
| Typical Dual Supply Voltage | — | ±15 V |
| Maximum Dual Supply Voltage | — | ±20 V |
| Maximum Power Dissipation | — | 600 mW |
| Process Technology | — | Monolithic integrated circuit |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |