INA101AM vs INA101SM Vergleich
Detaillierter Direktvergleich von INA101AM von Texas Instruments und INA101SM von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
INA101AM - Very High Accuracy Instrumentation Amplifier | Texas Instruments
INA101AM ✓ AktivSpezifikationsvergleich
| Parameter | INA101AM | INA101SM |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Unknown |
| Product Type | Instrumentation Amplifier | Very high accuracy instrumentation amplifier |
| Number of Channels | 1 channel | — |
| Architecture | Three precision operational amplifiers with laser-trimmed metal-film resistors | — |
| Input Type | Differential | — |
| Supply Voltage Range | Approximately ±5 V to ±20 V; exact operating limits are [DATA_NEEDED: supply voltage range] | — |
| Maximum Supply Voltage | ±20 V | — |
| Offset Voltage | 25 mV maximum | — |
| Input Drift | 0.25 mV/°C maximum | — |
| Nonlinearity | 0.002% | — |
| Rauschdichte | 13 nV/√Hz | — |
| Common-Mode Rejection Ratio | 106 dB at 60 Hz | — |
| Input Impedance | 10 GΩ | — |
| Bandwidth | Approximately 300 kHz | — |
| Gehäuse | TO-100-10 | TO-100-10, through-hole |
| Montageart | Through-hole | Through-hole |
| Application Areas | Strain gauges, thermocouples, RTDs, remote sensors, and general-purpose data acquisition | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Number of Circuits | — | 1 circuit |
| Internal Architecture | — | 3 precision operational amplifiers with laser-trimmed metal-film resistors |
| Maximum Input Offset Voltage | — | 25 uV max |
| Maximum Input Drift | — | 0.25 uV/°C max |
| Low Nonlinearity | — | 0.002% |
| Input Noise Density | — | 13 nV/√Hz |
| High Common-Mode Rejection | — | Specified at 60 Hz |
| High Input Impedance | — | 10^10 ohm |
| Minimum Dual Supply Voltage | — | ±5 V |
| Typical Dual Supply Voltage | — | ±15 V |
| Maximum Dual Supply Voltage | — | ±20 V |
| Maximum Power Dissipation | — | 600 mW |
| Process Technology | — | Monolithic integrated circuit |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |