INA121P vs INA121PA Comparison
Detailed side-by-side comparison of INA121P by Texas Instruments and INA121PA by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
INA121P - FET-Input Low Power Instrumentation Amplifier DIP-8 | Texas Instruments
INA121P ✓ ActiveSpecification Comparison
| Parameter | INA121P | INA121PA |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Amplifier Type | Instrumentation Amplifier (3-op-amp topology) | Instrumentation amplifier |
| Number of Channels | 1 | — |
| Input Type | FET / CMOS | — |
| Input Bias Current | ±4 pA typical | ±4 pA |
| Input Offset Voltage | ±200 µV typical | ±200 µV |
| Input Offset Drift | ±2 µV/°C typical | ±2 µV/°C |
| Input Voltage Noise Density | 20 nV/√Hz at 1 kHz | — |
| Quiescent Current | ±450 µA typical | ±450 µA |
| Common-Mode Rejection Ratio (CMRR) | 106 dB minimum | — |
| Bandwidth (-3 dB) | 600 kHz at G = 100 | — |
| Nonlinearity Error | 0.001% (G = 10) | 0.001% |
| Gain Range | 1 V/V to 10,000 V/V (single external resistor) | 1 to 10,000 V/V |
| Supply Voltage Range | ±2.25 V to ±18 V | ±18 V |
| Input Protection | ±40 V differential and common-mode | — |
| Operating Temperature Range | -40 °C to +85 °C | -40°C to +85°C |
| Package | 8-Pin PDIP (P) | 8-pin plastic DIP |
| Mounting Type | Through-Hole | Through-hole |
| Slew Rate | [DATA_NEEDED: slew rate from datasheet] | — |
| RoHS Status | Compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free Finish | Yes (Matte Tin) | — |
| Number of Circuits | — | 1 circuit |
| Input Noise | — | 100 nV/√Hz |
| Common-Mode Rejection Ratio | — | 106 dB |
| Gain-Bandwidth Product | — | 600 kHz |
| Architecture | — | Three-op-amp |
| REACH Status | — | [DATA_NEEDED: REACH status] |