INA121P vs INA121PA Karşılaştırma
Ayrıntılı yan yana karşılaştırma INA121P tarafından Texas Instruments ve INA121PA tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Texas Instruments
INA121P - FET-Input Low Power Instrumentation Amplifier DIP-8 | Texas Instruments
INA121P ✓ AktifÖzellik Karşılaştırması
| Parametre | INA121P | INA121PA |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Amplifier Type | Instrumentation Amplifier (3-op-amp topology) | Instrumentation amplifier |
| Number of Channels | 1 | — |
| Input Type | FET / CMOS | — |
| Input Bias Current | ±4 pA typical | ±4 pA |
| Input Offset Voltage | ±200 µV typical | ±200 µV |
| Input Offset Drift | ±2 µV/°C typical | ±2 µV/°C |
| Input Voltage Noise Density | 20 nV/√Hz at 1 kHz | — |
| Durağan Akım | ±450 µA typical | ±450 µA |
| Common-Mode Rejection Ratio (CMRR) | 106 dB minimum | — |
| Bandwidth (-3 dB) | 600 kHz at G = 100 | — |
| Nonlinearity Error | 0.001% (G = 10) | 0.001% |
| Gain Range | 1 V/V to 10,000 V/V (single external resistor) | 1 to 10,000 V/V |
| Supply Voltage Range | ±2.25 V to ±18 V | ±18 V |
| Input Protection | ±40 V differential and common-mode | — |
| İşletim Sıcaklığı Aralığı | -40 °C to +85 °C | -40°C to +85°C |
| Paket | 8-Pin PDIP (P) | 8-pin plastic DIP |
| Montaj Türü | Through-Hole | Through-hole |
| Slew Rate | [DATA_NEEDED: slew rate from datasheet] | — |
| RoHS Durumu | Compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free Finish | Yes (Matte Tin) | — |
| Number of Circuits | — | 1 circuit |
| Input Noise | — | 100 nV/√Hz |
| Common-Mode Rejection Ratio | — | 106 dB |
| Gain-Bandwidth Product | — | 600 kHz |
| Architecture | — | Three-op-amp |
| REACH Status | — | [DATA_NEEDED: REACH status] |