INA121P vs INA121PA Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci INA121P disebabkan oleh Texas Instruments dan INA121PA disebabkan oleh Texas Instruments. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Texas Instruments
INA121P - FET-Input Low Power Instrumentation Amplifier DIP-8 | Texas Instruments
INA121P ✓ AktifPengandingan Spesifikasi
| Parametr | INA121P | INA121PA |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Amplifier Type | Instrumentation Amplifier (3-op-amp topology) | Instrumentation amplifier |
| Number of Channels | 1 | — |
| Input Type | FET / CMOS | — |
| Input Bias Current | ±4 pA typical | ±4 pA |
| Input Offset Voltage | ±200 µV typical | ±200 µV |
| Input Offset Drift | ±2 µV/°C typical | ±2 µV/°C |
| Input Voltage Noise Density | 20 nV/√Hz at 1 kHz | — |
| Arus Dalam Tentera | ±450 µA typical | ±450 µA |
| Common-Mode Rejection Ratio (CMRR) | 106 dB minimum | — |
| Bandwidth (-3 dB) | 600 kHz at G = 100 | — |
| Nonlinearity Error | 0.001% (G = 10) | 0.001% |
| Gain Range | 1 V/V to 10,000 V/V (single external resistor) | 1 to 10,000 V/V |
| Supply Voltage Range | ±2.25 V to ±18 V | ±18 V |
| Input Protection | ±40 V differential and common-mode | — |
| Gambaran Suhu Operasi | -40 °C to +85 °C | -40°C to +85°C |
| Kemasan | 8-Pin PDIP (P) | 8-pin plastic DIP |
| Jenis Pemasangan | Through-Hole | Through-hole |
| Slew Rate | [DATA_NEEDED: slew rate from datasheet] | — |
| Status RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free Finish | Yes (Matte Tin) | — |
| Number of Circuits | — | 1 circuit |
| Input Noise | — | 100 nV/√Hz |
| Common-Mode Rejection Ratio | — | 106 dB |
| Gain-Bandwidth Product | — | 600 kHz |
| Architecture | — | Three-op-amp |
| REACH Status | — | [DATA_NEEDED: REACH status] |