INA121P vs INA122PA Comparison
Detailed side-by-side comparison of INA121P by Texas Instruments and INA122PA by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
INA121P - FET-Input Low Power Instrumentation Amplifier DIP-8 | Texas Instruments
INA121P ✓ ActiveTexas Instruments
INA122PA - 60uA Micropower Instrumentation Amplifier, 36V | Texas Instruments
INA122PA ✓ ActiveSpecification Comparison
| Parameter | INA121P | INA122PA |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Amplifier Type | Instrumentation Amplifier (3-op-amp topology) | Instrumentation amplifier, two-op-amp design |
| Number of Channels | 1 | 1 |
| Input Type | FET / CMOS | — |
| Input Bias Current | ±4 pA typical | — |
| Input Offset Voltage | ±200 µV typical | — |
| Input Offset Drift | ±2 µV/°C typical | — |
| Input Voltage Noise Density | 20 nV/√Hz at 1 kHz | — |
| Quiescent Current | ±450 µA typical | 60 uA |
| Common-Mode Rejection Ratio (CMRR) | 106 dB minimum | — |
| Bandwidth (-3 dB) | 600 kHz at G = 100 | — |
| Nonlinearity Error | 0.001% (G = 10) | — |
| Gain Range | 1 V/V to 10,000 V/V (single external resistor) | 5 V/V to 10,000 V/V |
| Supply Voltage Range | ±2.25 V to ±18 V | — |
| Input Protection | ±40 V differential and common-mode | — |
| Operating Temperature Range | -40 °C to +85 °C | [DATA_NEEDED: operating temperature range] |
| Package | 8-Pin PDIP (P) | 8-pin PDIP (P) |
| Mounting Type | Through-Hole | Through-hole |
| Slew Rate | [DATA_NEEDED: slew rate from datasheet] | [DATA_NEEDED: slew rate specification] |
| RoHS Status | Compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free Finish | Yes (Matte Tin) | — |
| Supply Voltage Range (Single Supply) | — | 2.2 V to 36 V |
| Supply Voltage Range (Dual Supply) | — | +/-18 V |
| Input Offset Voltage (max) | — | 250 uV |
| Input Offset Drift (max) | — | 3 uV/degC |
| Common-Mode Rejection Ratio | — | 90 dB |
| Gain Bandwidth Product | — | 120 kHz |
| Input Common-Mode Range | — | (V-) - 0.1 V |
| Output Swing | — | Rail-to-rail |
| Supply Type | — | Single or dual supply operation |
| Input Noise | — | [DATA_NEEDED: input noise specification] |