INA121P vs INA122PA مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ INA121P بواسطة Texas Instruments و INA122PA بواسطة Texas Instruments. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
Texas Instruments
INA121P - FET-Input Low Power Instrumentation Amplifier DIP-8 | Texas Instruments
INA121P ✓ نشطTexas Instruments
INA122PA - 60uA Micropower Instrumentation Amplifier, 36V | Texas Instruments
INA122PA ✓ نشطمقارنة المواصفات
| المعامل | INA121P | INA122PA |
|---|---|---|
| العلامة التجارية | Texas Instruments | Texas Instruments |
| الفئة | Amplifier ICs | Amplifier ICs |
| حالة دورة الحياة | نشط | نشط |
| Amplifier Type | Instrumentation Amplifier (3-op-amp topology) | Instrumentation amplifier, two-op-amp design |
| Number of Channels | 1 | 1 |
| Input Type | FET / CMOS | — |
| Input Bias Current | ±4 pA typical | — |
| Input Offset Voltage | ±200 µV typical | — |
| Input Offset Drift | ±2 µV/°C typical | — |
| Input Voltage Noise Density | 20 nV/√Hz at 1 kHz | — |
| تيار السكون | ±450 µA typical | 60 uA |
| Common-Mode Rejection Ratio (CMRR) | 106 dB minimum | — |
| Bandwidth (-3 dB) | 600 kHz at G = 100 | — |
| Nonlinearity Error | 0.001% (G = 10) | — |
| Gain Range | 1 V/V to 10,000 V/V (single external resistor) | 5 V/V to 10,000 V/V |
| Supply Voltage Range | ±2.25 V to ±18 V | — |
| Input Protection | ±40 V differential and common-mode | — |
| نطاق درجة حرارة التشغيل | -40 °C to +85 °C | [DATA_NEEDED: operating temperature range] |
| العلبة | 8-Pin PDIP (P) | 8-pin PDIP (P) |
| نوع التركيب | Through-Hole | Through-hole |
| Slew Rate | [DATA_NEEDED: slew rate from datasheet] | [DATA_NEEDED: slew rate specification] |
| حالة RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free Finish | Yes (Matte Tin) | — |
| Supply Voltage Range (Single Supply) | — | 2.2 V to 36 V |
| Supply Voltage Range (Dual Supply) | — | +/-18 V |
| Input Offset Voltage (max) | — | 250 uV |
| Input Offset Drift (max) | — | 3 uV/degC |
| Common-Mode Rejection Ratio | — | 90 dB |
| Gain Bandwidth Product | — | 120 kHz |
| Input Common-Mode Range | — | (V-) - 0.1 V |
| Output Swing | — | Rail-to-rail |
| Supply Type | — | Single or dual supply operation |
| Input Noise | — | [DATA_NEEDED: input noise specification] |