INA121P vs INA122PA Karşılaştırma
Ayrıntılı yan yana karşılaştırma INA121P tarafından Texas Instruments ve INA122PA tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Texas Instruments
INA121P - FET-Input Low Power Instrumentation Amplifier DIP-8 | Texas Instruments
INA121P ✓ AktifTexas Instruments
INA122PA - 60uA Micropower Instrumentation Amplifier, 36V | Texas Instruments
INA122PA ✓ AktifÖzellik Karşılaştırması
| Parametre | INA121P | INA122PA |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Amplifier Type | Instrumentation Amplifier (3-op-amp topology) | Instrumentation amplifier, two-op-amp design |
| Number of Channels | 1 | 1 |
| Input Type | FET / CMOS | — |
| Input Bias Current | ±4 pA typical | — |
| Input Offset Voltage | ±200 µV typical | — |
| Input Offset Drift | ±2 µV/°C typical | — |
| Input Voltage Noise Density | 20 nV/√Hz at 1 kHz | — |
| Durağan Akım | ±450 µA typical | 60 uA |
| Common-Mode Rejection Ratio (CMRR) | 106 dB minimum | — |
| Bandwidth (-3 dB) | 600 kHz at G = 100 | — |
| Nonlinearity Error | 0.001% (G = 10) | — |
| Gain Range | 1 V/V to 10,000 V/V (single external resistor) | 5 V/V to 10,000 V/V |
| Supply Voltage Range | ±2.25 V to ±18 V | — |
| Input Protection | ±40 V differential and common-mode | — |
| İşletim Sıcaklığı Aralığı | -40 °C to +85 °C | [DATA_NEEDED: operating temperature range] |
| Paket | 8-Pin PDIP (P) | 8-pin PDIP (P) |
| Montaj Türü | Through-Hole | Through-hole |
| Slew Rate | [DATA_NEEDED: slew rate from datasheet] | [DATA_NEEDED: slew rate specification] |
| RoHS Durumu | Compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free Finish | Yes (Matte Tin) | — |
| Supply Voltage Range (Single Supply) | — | 2.2 V to 36 V |
| Supply Voltage Range (Dual Supply) | — | +/-18 V |
| Input Offset Voltage (max) | — | 250 uV |
| Input Offset Drift (max) | — | 3 uV/degC |
| Common-Mode Rejection Ratio | — | 90 dB |
| Gain Bandwidth Product | — | 120 kHz |
| Input Common-Mode Range | — | (V-) - 0.1 V |
| Output Swing | — | Rail-to-rail |
| Supply Type | — | Single or dual supply operation |
| Input Noise | — | [DATA_NEEDED: input noise specification] |