INA125U vs AD623ANZ Comparison
Detailed side-by-side comparison of INA125U by Texas Instruments and AD623ANZ by Analog Devices. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
INA125U - Precision Bridge Amplifier, 10V Ref | Texas Instruments
INA125U ✓ Active
Specification Comparison
| Parameter | INA125U | AD623ANZ |
|---|---|---|
| Brand | Texas Instruments | Analog Devices |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $0.00 | $0.00 |
| Product Type | Instrumentation amplifier with precision voltage reference | Instrumentation amplifier |
| Channel Count | 1 circuit | — |
| Supply Voltage Range | 2.7 V to 36 V | 2.7 V to 12 V |
| Maximum Supply Voltage | 36 V | — |
| Gain Range | 4 V/V to 10,000 V/V | — |
| Gain Setting | Single external resistor | — |
| Quiescent Current | 460 µA | — |
| Input Offset Voltage | 250 µV maximum | — |
| Input Offset Drift | 2 µV/°C maximum | — |
| Voltage Reference | 10 V | — |
| Gain Error | [DATA_NEEDED: gain error] | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection ratio] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Bandwidth | 150 kHz | — |
| Noise at 1kHz | 38 nV/√Hz typical | — |
| Slew Rate | [DATA_NEEDED: slew rate] | — |
| Sleep Mode | Yes | — |
| Package | 16-pin SOIC | 8-PDIP |
| Mounting Type | Surface mount | — |
| Operating Temperature | [DATA_NEEDED: operating temperature range] | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | Unknown |
| REACH Status | [DATA_NEEDED: REACH status] | Unknown |
| Number of Circuits | — | 1 circuit |
| Single-Supply Configuration | — | 3 V to 12 V |
| Dual-Supply Operation | — | Supported |
| Output Swing | — | Rail-to-rail |
| Gain Programming | — | Single external gain-set resistor |
| Lead Count | — | 8 leads |
| Input Signal | — | Differential |
| Common-Mode Handling | — | Instrumentation-amplifier input |
| Power Class | — | Low-cost, low-power instrumentation amplifier |
| Product Class | — | Rail-to-rail instrumentation amplifier |
| Pin Configuration | — | Industry-standard 8-lead instrumentation-amplifier configuration |
| AEC-Q100 Qualification | — | Not applicable |
| Operating Temperature Range | — | [DATA_NEEDED: operating temperature range] |
| Gain Bandwidth | — | [DATA_NEEDED: gain bandwidth] |
| Input Noise Density | — | [DATA_NEEDED: input noise density] |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: common-mode rejection ratio] |