INA125U vs AD623ANZ Comparaison
Comparaison détaillée côte à côte de INA125U par Texas Instruments et AD623ANZ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | INA125U | AD623ANZ |
|---|---|---|
| Marque | Texas Instruments | Analog Devices |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,00 | $0,00 |
| Product Type | Instrumentation amplifier with precision voltage reference | Instrumentation amplifier |
| Channel Count | 1 circuit | — |
| Supply Voltage Range | 2.7 V to 36 V | 2.7 V to 12 V |
| Maximum Supply Voltage | 36 V | — |
| Gain Range | 4 V/V to 10,000 V/V | — |
| Gain Setting | Single external resistor | — |
| Courant de repos | 460 µA | — |
| Input Offset Voltage | 250 µV maximum | — |
| Input Offset Drift | 2 µV/°C maximum | — |
| Voltage Reference | 10 V | — |
| Gain Error | [DATA_NEEDED: gain error] | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection ratio] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Bandwidth | 150 kHz | — |
| Noise at 1kHz | 38 nV/√Hz typical | — |
| Slew Rate | [DATA_NEEDED: slew rate] | — |
| Sleep Mode | Yes | — |
| Boîtier | 16-pin SOIC | 8-PDIP |
| Type de montage | Surface mount | — |
| Température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Unknown |
| REACH Status | [DATA_NEEDED: REACH status] | Unknown |
| Number of Circuits | — | 1 circuit |
| Single-Supply Configuration | — | 3 V to 12 V |
| Dual-Supply Operation | — | Supported |
| Output Swing | — | Rail-to-rail |
| Gain Programming | — | Single external gain-set resistor |
| Lead Count | — | 8 leads |
| Input Signal | — | Differential |
| Common-Mode Handling | — | Instrumentation-amplifier input |
| Power Class | — | Low-cost, low-power instrumentation amplifier |
| Product Class | — | Rail-to-rail instrumentation amplifier |
| Pin Configuration | — | Industry-standard 8-lead instrumentation-amplifier configuration |
| AEC-Q100 Qualification | — | Not applicable |
| Plage de température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| Gain Bandwidth | — | [DATA_NEEDED: gain bandwidth] |
| Input Noise Density | — | [DATA_NEEDED: input noise density] |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: common-mode rejection ratio] |