INA125U vs AD623ANZ Vergleich
Detaillierter Direktvergleich von INA125U von Texas Instruments und AD623ANZ von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | INA125U | AD623ANZ |
|---|---|---|
| Marke | Texas Instruments | Analog Devices |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,00 | $0,00 |
| Product Type | Instrumentation amplifier with precision voltage reference | Instrumentation amplifier |
| Channel Count | 1 circuit | — |
| Supply Voltage Range | 2.7 V to 36 V | 2.7 V to 12 V |
| Maximum Supply Voltage | 36 V | — |
| Gain Range | 4 V/V to 10,000 V/V | — |
| Gain Setting | Single external resistor | — |
| Ruhestrom | 460 µA | — |
| Input Offset Voltage | 250 µV maximum | — |
| Input Offset Drift | 2 µV/°C maximum | — |
| Voltage Reference | 10 V | — |
| Gain Error | [DATA_NEEDED: gain error] | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection ratio] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Bandwidth | 150 kHz | — |
| Noise at 1kHz | 38 nV/√Hz typical | — |
| Slew Rate | [DATA_NEEDED: slew rate] | — |
| Sleep Mode | Yes | — |
| Gehäuse | 16-pin SOIC | 8-PDIP |
| Montageart | Surface mount | — |
| Betriebstemperatur | [DATA_NEEDED: operating temperature range] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | Unknown |
| REACH Status | [DATA_NEEDED: REACH status] | Unknown |
| Number of Circuits | — | 1 circuit |
| Single-Supply Configuration | — | 3 V to 12 V |
| Dual-Supply Operation | — | Supported |
| Output Swing | — | Rail-to-rail |
| Gain Programming | — | Single external gain-set resistor |
| Lead Count | — | 8 leads |
| Input Signal | — | Differential |
| Common-Mode Handling | — | Instrumentation-amplifier input |
| Power Class | — | Low-cost, low-power instrumentation amplifier |
| Product Class | — | Rail-to-rail instrumentation amplifier |
| Pin Configuration | — | Industry-standard 8-lead instrumentation-amplifier configuration |
| AEC-Q100 Qualification | — | Not applicable |
| Betriebstemperaturbereich | — | [DATA_NEEDED: operating temperature range] |
| Gain Bandwidth | — | [DATA_NEEDED: gain bandwidth] |
| Input Noise Density | — | [DATA_NEEDED: input noise density] |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: common-mode rejection ratio] |