INA128U vs LT1167IS8 Comparison
Detailed side-by-side comparison of INA128U by Texas Instruments and LT1167IS8 by Analog Devices. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Analog Devices
LT1167IS8 - Precision InAmp, Single-Resistor Gain, SOIC-8 | Analog Devices
LT1167IS8 ✓ ActiveSpecification Comparison
| Parameter | INA128U | LT1167IS8 |
|---|---|---|
| Brand | Texas Instruments | Analog Devices |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Device Type | Precision low-power instrumentation amplifier | — |
| Architecture | Three-op-amp instrumentation amplifier | — |
| Number of Amplifiers | 1 amplifier | — |
| Common-Mode Rejection Ratio | 130 dB | — |
| Minimum Common-Mode Rejection Ratio | 120 dB | — |
| Quiescent Current | 700 µA | — |
| Maximum Input Offset Voltage | 50 µV | — |
| Maximum Input Offset Drift | 0.5 µV/°C | — |
| Maximum Input Bias Current | 5 nA | — |
| Input Protection Range | ±40 V | — |
| Supply Voltage Range | ±2.25 V to ±18 V | ±2.3 V to ±18 V |
| Gain Range | 1 to 100,000 | 1 to 10,000 (single external resistor) |
| Bandwidth at Gain 100 | 200 kHz | — |
| Maximum Slew Rate | 4 V/µs | — |
| Maximum Gain-Bandwidth Product | 1.3 MHz | — |
| Package | 8-pin SOIC | 8-pin SOIC (SO-8) |
| Mounting Type | Surface mount | Surface Mount |
| Operating Temperature Range | -40°C to +85°C | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | Compliant (PBF suffix) |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Amplifier Type | — | Instrumentation Amplifier |
| Number of Channels | — | 1 |
| Input Voltage Noise Density | — | 7.5 nV/√Hz at 1 kHz |
| Maximum Offset Voltage | — | 60 µV |
| Slew Rate | — | 1.2 V/µs |
| Gain-Bandwidth Product | — | 1 MHz |
| Supply Current (typical) | — | 0.9 mA |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Operating Temperature | — | -40 °C to +85 °C (industrial) |
| ESD Protection (with 5 kΩ resistors) | — | IEC 1000-4-2 level 4 compliant |
| MSL Level | — | [DATA_NEEDED: MSL level] |