INA128U vs LT1167IS8 비교
다음의 상세 나란히 비교: INA128U 제조: Texas Instruments 및 LT1167IS8 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Analog Devices
LT1167IS8 - Precision InAmp, Single-Resistor Gain, SOIC-8 | Analog Devices
LT1167IS8 ✓ 활성사양 비교
| 파라미터 | INA128U | LT1167IS8 |
|---|---|---|
| 브랜드 | Texas Instruments | Analog Devices |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Device Type | Precision low-power instrumentation amplifier | — |
| Architecture | Three-op-amp instrumentation amplifier | — |
| Number of Amplifiers | 1 amplifier | — |
| Common-Mode Rejection Ratio | 130 dB | — |
| Minimum Common-Mode Rejection Ratio | 120 dB | — |
| 대기 전류 | 700 µA | — |
| Maximum Input Offset Voltage | 50 µV | — |
| Maximum Input Offset Drift | 0.5 µV/°C | — |
| Maximum Input Bias Current | 5 nA | — |
| Input Protection Range | ±40 V | — |
| Supply Voltage Range | ±2.25 V to ±18 V | ±2.3 V to ±18 V |
| Gain Range | 1 to 100,000 | 1 to 10,000 (single external resistor) |
| Bandwidth at Gain 100 | 200 kHz | — |
| Maximum Slew Rate | 4 V/µs | — |
| Maximum Gain-Bandwidth Product | 1.3 MHz | — |
| 패키지 | 8-pin SOIC | 8-pin SOIC (SO-8) |
| 실장 유형 | Surface mount | Surface Mount |
| 동작 온도 범위 | -40°C to +85°C | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | Compliant (PBF suffix) |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Amplifier Type | — | Instrumentation Amplifier |
| Number of Channels | — | 1 |
| Input Voltage Noise Density | — | 7.5 nV/√Hz at 1 kHz |
| Maximum Offset Voltage | — | 60 µV |
| Slew Rate | — | 1.2 V/µs |
| Gain-Bandwidth Product | — | 1 MHz |
| Supply Current (typical) | — | 0.9 mA |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| 동작 온도 | — | -40 °C to +85 °C (industrial) |
| ESD Protection (with 5 kΩ resistors) | — | IEC 1000-4-2 level 4 compliant |
| MSL 레벨 | — | [DATA_NEEDED: MSL level] |