INA128U vs LT1167IS8 比較

詳細並排比較 INA128U 由 Texas Instruments 與 LT1167IS8 由 Analog Devices. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

Texas Instruments
INA128U INA128U - 130dB CMRR Precision Instrumentation Amplifier | TI

INA128U - 130dB CMRR Precision Instrumentation Amplifier | TI

INA128U ✓ 啟用中

規格比較

參數 INA128U LT1167IS8
品牌 Texas Instruments Analog Devices
類別 Amplifier ICs Amplifier ICs
生命週期狀態 啟用中 啟用中
Device Type Precision low-power instrumentation amplifier —
Architecture Three-op-amp instrumentation amplifier —
Number of Amplifiers 1 amplifier —
Common-Mode Rejection Ratio 130 dB —
Minimum Common-Mode Rejection Ratio 120 dB —
靜態電流 700 µA —
Maximum Input Offset Voltage 50 µV —
Maximum Input Offset Drift 0.5 µV/°C —
Maximum Input Bias Current 5 nA —
Input Protection Range ±40 V —
Supply Voltage Range ±2.25 V to ±18 V ±2.3 V to ±18 V
Gain Range 1 to 100,000 1 to 10,000 (single external resistor)
Bandwidth at Gain 100 200 kHz —
Maximum Slew Rate 4 V/µs —
Maximum Gain-Bandwidth Product 1.3 MHz —
封裝 8-pin SOIC 8-pin SOIC (SO-8)
安裝類型 Surface mount Surface Mount
工作溫度範圍 -40°C to +85°C —
RoHS 狀態 [DATA_NEEDED: RoHS status] Compliant (PBF suffix)
REACH Status [DATA_NEEDED: REACH status] —
Automotive Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Amplifier Type — Instrumentation Amplifier
Number of Channels — 1
Input Voltage Noise Density — 7.5 nV/√Hz at 1 kHz
Maximum Offset Voltage — 60 µV
Slew Rate — 1.2 V/µs
Gain-Bandwidth Product — 1 MHz
Supply Current (typical) — 0.9 mA
Input Common-Mode Range — [DATA_NEEDED: input common-mode voltage range]
工作溫度 — -40 °C to +85 °C (industrial)
ESD Protection (with 5 kΩ resistors) — IEC 1000-4-2 level 4 compliant
MSL 等級 — [DATA_NEEDED: MSL level]

資料表與資源

瀏覽所有產品 建立 BOM 索取報價