INA129P vs INA129PA Comparison
Detailed side-by-side comparison of INA129P by Texas Instruments and INA129PA by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | INA129P | INA129PA |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Product Type | Precision low-power instrumentation amplifier | — |
| Amplifier Circuit Count | 1 | — |
| Package | 8-pin plastic DIP (PDIP) | 8-pin plastic DIP |
| Mounting Type | Through-hole | Through-hole |
| Maximum Offset Voltage | 50 uV | — |
| Maximum Offset Drift | 0.5 uV/°C | — |
| Maximum Input Bias Current | 5 nA | 5 nA |
| Minimum Common-Mode Rejection | 120 dB | — |
| Input Protection | ±40 V | — |
| Supply Voltage Range | ±18 V | — |
| Bandwidth at Gain 100 | 200 kHz | — |
| Architecture | Three-op-amp instrumentation-amplifier design | — |
| Gain Adjustment | Single external resistor | — |
| Gain Range | 1 to 10,000 | [DATA_NEEDED: gain range] |
| Temperature Range | -40°C to +85°C | — |
| Low-Power Feature | Low-power instrumentation-amplifier design | — |
| Current Feedback | Yes | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Device Type | — | Precision, low-power instrumentation amplifier |
| Number of Amplifiers | — | 1 circuit |
| Maximum Input Offset Voltage | — | 50 uV |
| Maximum Input Offset Drift | — | 0.5 uV/degC |
| Minimum Common-Mode Rejection Ratio | — | 120 dB |
| Maximum Protected Input Voltage | — | -40 V to +40 V |
| Wide Supply Range | — | Plus or minus 18 V |
| Operating Temperature Range | — | -40 degC to +85 degC |
| Gain-Setting Resistor | — | 49.4 kilohm |
| Gain Equation | — | [DATA_NEEDED: INA129 gain equation] |
| Quiescent Current | — | [DATA_NEEDED: quiescent current] |
| Gain-Bandwidth Product | — | [DATA_NEEDED: gain-bandwidth product] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| Maximum Output Voltage | — | [DATA_NEEDED: maximum output voltage] |
| Maximum Output Current | — | [DATA_NEEDED: maximum output current] |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |