INA129P vs INA129PA Comparação
Comparação detalhada lado a lado de INA129P por Texas Instruments e INA129PA por Texas Instruments. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Comparação de especificações
| Parâmetro | INA129P | INA129PA |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoria | Amplifier ICs | Amplifier ICs |
| Status do ciclo de vida | Ativo | Ativo |
| Product Type | Precision low-power instrumentation amplifier | — |
| Amplifier Circuit Count | 1 | — |
| Encapsulamento | 8-pin plastic DIP (PDIP) | 8-pin plastic DIP |
| Tipo de montagem | Through-hole | Through-hole |
| Maximum Offset Voltage | 50 uV | — |
| Maximum Offset Drift | 0.5 uV/°C | — |
| Maximum Input Bias Current | 5 nA | 5 nA |
| Minimum Common-Mode Rejection | 120 dB | — |
| Input Protection | ±40 V | — |
| Supply Voltage Range | ±18 V | — |
| Bandwidth at Gain 100 | 200 kHz | — |
| Architecture | Three-op-amp instrumentation-amplifier design | — |
| Gain Adjustment | Single external resistor | — |
| Gain Range | 1 to 10,000 | [DATA_NEEDED: gain range] |
| Temperature Range | -40°C to +85°C | — |
| Low-Power Feature | Low-power instrumentation-amplifier design | — |
| Current Feedback | Yes | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Device Type | — | Precision, low-power instrumentation amplifier |
| Number of Amplifiers | — | 1 circuit |
| Maximum Input Offset Voltage | — | 50 uV |
| Maximum Input Offset Drift | — | 0.5 uV/degC |
| Minimum Common-Mode Rejection Ratio | — | 120 dB |
| Maximum Protected Input Voltage | — | -40 V to +40 V |
| Wide Supply Range | — | Plus or minus 18 V |
| Faixa de temperatura de operação | — | -40 degC to +85 degC |
| Gain-Setting Resistor | — | 49.4 kilohm |
| Gain Equation | — | [DATA_NEEDED: INA129 gain equation] |
| Corrente de repouso | — | [DATA_NEEDED: quiescent current] |
| Gain-Bandwidth Product | — | [DATA_NEEDED: gain-bandwidth product] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| Maximum Output Voltage | — | [DATA_NEEDED: maximum output voltage] |
| Corrente máxima de saída | — | [DATA_NEEDED: maximum output current] |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |