INA129P vs INA129PA Comparaison
Comparaison détaillée côte à côte de INA129P par Texas Instruments et INA129PA par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | INA129P | INA129PA |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Precision low-power instrumentation amplifier | — |
| Amplifier Circuit Count | 1 | — |
| Boîtier | 8-pin plastic DIP (PDIP) | 8-pin plastic DIP |
| Type de montage | Through-hole | Through-hole |
| Maximum Offset Voltage | 50 uV | — |
| Maximum Offset Drift | 0.5 uV/°C | — |
| Maximum Input Bias Current | 5 nA | 5 nA |
| Minimum Common-Mode Rejection | 120 dB | — |
| Input Protection | ±40 V | — |
| Supply Voltage Range | ±18 V | — |
| Bandwidth at Gain 100 | 200 kHz | — |
| Architecture | Three-op-amp instrumentation-amplifier design | — |
| Gain Adjustment | Single external resistor | — |
| Gain Range | 1 to 10,000 | [DATA_NEEDED: gain range] |
| Temperature Range | -40°C to +85°C | — |
| Low-Power Feature | Low-power instrumentation-amplifier design | — |
| Current Feedback | Yes | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Device Type | — | Precision, low-power instrumentation amplifier |
| Number of Amplifiers | — | 1 circuit |
| Maximum Input Offset Voltage | — | 50 uV |
| Maximum Input Offset Drift | — | 0.5 uV/degC |
| Minimum Common-Mode Rejection Ratio | — | 120 dB |
| Maximum Protected Input Voltage | — | -40 V to +40 V |
| Wide Supply Range | — | Plus or minus 18 V |
| Plage de température de fonctionnement | — | -40 degC to +85 degC |
| Gain-Setting Resistor | — | 49.4 kilohm |
| Gain Equation | — | [DATA_NEEDED: INA129 gain equation] |
| Courant de repos | — | [DATA_NEEDED: quiescent current] |
| Gain-Bandwidth Product | — | [DATA_NEEDED: gain-bandwidth product] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| Maximum Output Voltage | — | [DATA_NEEDED: maximum output voltage] |
| Courant de sortie maximal | — | [DATA_NEEDED: maximum output current] |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |