INA129U vs INA128UG4 Comparison
Detailed side-by-side comparison of INA129U by Texas Instruments and INA128UG4 by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | INA129U | INA128UG4 |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Product Type | Precision, low-power instrumentation amplifier | — |
| Architecture | Three-op-amp instrumentation amplifier | — |
| Supply Range | ±2.25 V to ±18 V | — |
| Maximum Supply | ±18 V | — |
| Gain-Bandwidth Product | 1.3 MHz | 1.3 MHz |
| Bandwidth at G = 100 | 200 kHz | — |
| Maximum Offset Voltage | 50 µV | — |
| Maximum Offset Drift | 0.5 µV/°C | — |
| Maximum Input Bias Current | 5 nA | — |
| Minimum Common-Mode Rejection | 120 dB | — |
| Input Protection | ±40 V differential inputs | — |
| Gain Range | 1 to 10,000 | — |
| Gain-Setting Resistor | 49.4 kΩ reference resistor | — |
| Operating Temperature Range | -40°C to +85°C | [DATA_NEEDED: operating temperature range] |
| Package | 8-pin SOIC | 8-pin SOIC, 3.90 mm body width |
| Circuit Count | 1 amplifier | — |
| Quiescent Current | [DATA_NEEDED: low quiescent current value] | 700 uA |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Amplifier Type | — | Precision instrumentation amplifier |
| Number of Circuits | — | 1 circuit |
| Common-Mode Rejection Ratio | — | 130 dB |
| Input Offset Voltage | — | 10 uV |
| Input Noise Density | — | 8 nV/sqrt(Hz) |
| Slew Rate | — | 4 V/us |
| Supply Voltage Range | — | ±2.25 V to ±18 V |
| Typical Supply Voltage | — | ±15 V |
| Mounting Type | — | Surface mount |
| Number of Pins | — | 8 pins |
| Gain Configuration | — | External gain-setting resistor |
| Input Type | — | Differential |
| Product Description | — | Precision, low-power instrumentation amplifier |
| REACH Status | — | [DATA_NEEDED: REACH status] |