INA129U vs INA128UG4 Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci INA129U disebabkan oleh Texas Instruments dan INA128UG4 disebabkan oleh Texas Instruments. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | INA129U | INA128UG4 |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Precision, low-power instrumentation amplifier | — |
| Architecture | Three-op-amp instrumentation amplifier | — |
| Supply Range | ±2.25 V to ±18 V | — |
| Maximum Supply | ±18 V | — |
| Gain-Bandwidth Product | 1.3 MHz | 1.3 MHz |
| Bandwidth at G = 100 | 200 kHz | — |
| Maximum Offset Voltage | 50 µV | — |
| Maximum Offset Drift | 0.5 µV/°C | — |
| Maximum Input Bias Current | 5 nA | — |
| Minimum Common-Mode Rejection | 120 dB | — |
| Input Protection | ±40 V differential inputs | — |
| Gain Range | 1 to 10,000 | — |
| Gain-Setting Resistor | 49.4 kΩ reference resistor | — |
| Gambaran Suhu Operasi | -40°C to +85°C | [DATA_NEEDED: operating temperature range] |
| Kemasan | 8-pin SOIC | 8-pin SOIC, 3.90 mm body width |
| Circuit Count | 1 amplifier | — |
| Arus Dalam Tentera | [DATA_NEEDED: low quiescent current value] | 700 uA |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Amplifier Type | — | Precision instrumentation amplifier |
| Number of Circuits | — | 1 circuit |
| Common-Mode Rejection Ratio | — | 130 dB |
| Input Offset Voltage | — | 10 uV |
| Input Noise Density | — | 8 nV/sqrt(Hz) |
| Slew Rate | — | 4 V/us |
| Supply Voltage Range | — | ±2.25 V to ±18 V |
| Typical Supply Voltage | — | ±15 V |
| Jenis Pemasangan | — | Surface mount |
| Bilangan Pin | — | 8 pins |
| Gain Configuration | — | External gain-setting resistor |
| Input Type | — | Differential |
| Product Description | — | Precision, low-power instrumentation amplifier |
| REACH Status | — | [DATA_NEEDED: REACH status] |