INA129U vs INA128UG4 Karşılaştırma
Ayrıntılı yan yana karşılaştırma INA129U tarafından Texas Instruments ve INA128UG4 tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | INA129U | INA128UG4 |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | Precision, low-power instrumentation amplifier | — |
| Architecture | Three-op-amp instrumentation amplifier | — |
| Supply Range | ±2.25 V to ±18 V | — |
| Maximum Supply | ±18 V | — |
| Gain-Bandwidth Product | 1.3 MHz | 1.3 MHz |
| Bandwidth at G = 100 | 200 kHz | — |
| Maximum Offset Voltage | 50 µV | — |
| Maximum Offset Drift | 0.5 µV/°C | — |
| Maximum Input Bias Current | 5 nA | — |
| Minimum Common-Mode Rejection | 120 dB | — |
| Input Protection | ±40 V differential inputs | — |
| Gain Range | 1 to 10,000 | — |
| Gain-Setting Resistor | 49.4 kΩ reference resistor | — |
| İşletim Sıcaklığı Aralığı | -40°C to +85°C | [DATA_NEEDED: operating temperature range] |
| Paket | 8-pin SOIC | 8-pin SOIC, 3.90 mm body width |
| Circuit Count | 1 amplifier | — |
| Durağan Akım | [DATA_NEEDED: low quiescent current value] | 700 uA |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Amplifier Type | — | Precision instrumentation amplifier |
| Number of Circuits | — | 1 circuit |
| Common-Mode Rejection Ratio | — | 130 dB |
| Input Offset Voltage | — | 10 uV |
| Input Noise Density | — | 8 nV/sqrt(Hz) |
| Slew Rate | — | 4 V/us |
| Supply Voltage Range | — | ±2.25 V to ±18 V |
| Typical Supply Voltage | — | ±15 V |
| Montaj Türü | — | Surface mount |
| Pin Sayısı | — | 8 pins |
| Gain Configuration | — | External gain-setting resistor |
| Input Type | — | Differential |
| Product Description | — | Precision, low-power instrumentation amplifier |
| REACH Status | — | [DATA_NEEDED: REACH status] |