INA129UAG4 vs AD620ARZ Comparison
Detailed side-by-side comparison of INA129UAG4 by Texas Instruments and AD620ARZ by Analog Devices. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
INA129UAG4 - 1.3MHz Precision Instrumentation Amp | Texas Instruments
INA129UAG4 ✓ ActiveAnalog Devices
AD620ARZ - Low Cost Low Power Instrumentation Amplifier | Analog Devices
AD620ARZ ✓ ActiveSpecification Comparison
| Parameter | INA129UAG4 | AD620ARZ |
|---|---|---|
| Brand | Texas Instruments | Analog Devices |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Amplifier Type | Precision instrumentation amplifier | Instrumentation Amplifier |
| Number of Circuits | 1 circuit | 1 |
| Gain-Bandwidth Product | 1.3 MHz | — |
| Bandwidth at Gain 100 | 200 kHz | — |
| Gain Range | 1 to 10,000 | 1 to 10,000 |
| Input Offset Voltage | 25 µV typical | 50 µV |
| Input Bias Current | 5 nA typical | 1.0 nA |
| Input Protection Range | ±40 V | — |
| Minimum Supply Voltage | 1.8 V | — |
| Maximum Supply Voltage | [DATA_NEEDED: maximum supply voltage] | — |
| Operating Temperature Range | -40°C to +85°C | -40°C to +85°C |
| Package | 8-SOIC, 0.154 inch width, 3.90 mm body width | 8-SOIC (0.154", 3.90mm Width) |
| Mounting Type | Surface mount | Surface Mount |
| Architecture | Three-op-amp with current-feedback input circuitry | — |
| Gain Setting | External resistor | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection ratio] | — |
| Input Offset Voltage Drift | [DATA_NEEDED: input offset voltage drift] | — |
| Supply Current | [DATA_NEEDED: supply current] | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Supply Voltage Range | — | ±2.3 V to ±18 V |
| Supply Current (Max) | — | 1.3 mA |
| CMRR at Gain 10 | — | 100 dB |
| Bandwidth at Gain 10 | — | 120 kHz |
| Voltage Noise Density at 1 kHz | — | 9 nV/√Hz |
| Input Impedance | — | 10 GΩ |