INA129UAG4 - 1.3MHz Precision Instrumentation Amp | Texas Instruments
MPN: INA129UAG4 ✓ ActiveINA129UAG4 Overview
An instrumentation amplifier is a specialized amplifier that combines differential input measurement, high input impedance, accurate gain setting, and excellent common-mode rejection. This places the INA129 within the broader hierarchy of operational amplifiers, analog signal-conditioning ICs, and power-management-aware semiconductor components. The INA12x family is designed for sensor interfaces and industrial instrumentation where small differential signals must be measured in the presence of much larger common-mode voltages.
The INA129UAG4 combines a broad usable gain range with low power consumption and internal input protection. Its typical input offset voltage is 25 µV, while input bias current is typically 5 nA. The low offset and bias values help preserve measurement accuracy in high-impedance sensing circuits. A gain of 100 supports 200 kHz bandwidth, allowing the amplifier to handle measurements beyond static DC while retaining useful signal bandwidth.
The device uses a three-op-amp topology and an external gain-setting resistor. This approach supports gains from 1 to 10,000 while simplifying the circuit compared with a discrete three-amplifier implementation. The input circuitry uses a current-feedback architecture, which maintains bandwidth at higher closed-loop gains where a conventional voltage-feedback amplifier can become bandwidth-limited.
Typical applications include bridge and strain-gauge sensor front ends, low-current measurements, laboratory instrumentation, biomedical signal acquisition, and industrial process-control inputs. The ±40 V internal input protection is especially useful when a sensor line may experience transients beyond the normal low-voltage operating range. The compact SOIC-8 package supports conventional surface-mount assembly and requires no external protection components for the stated input limits.
PCB design should keep the gain resistor close to pin 8 to minimize parasitic resistance and preserve gain accuracy. Input and reference connections should be routed away from switching nodes and high-current return paths. Because instrumentation amplifiers reject common-mode voltage rather than gain error, the reference pin must be driven cleanly and decoupled when a nonzero output offset is required.
This product page combines electrical characteristics, replacement guidance, package details, and application-oriented design guidance to accelerate sensor-front-end evaluation and PCB implementation.
Drop-in alternatives for INA129UAG4 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with INA129UAG4 (same form factor and footprint) — differing in Package, Input Bias Current, Input Offset Voltage, Operating Temperature Range, Amplifier Type.
INA129U
✅ Drop-InContact for price
View Datasheet →INA129UA
✅ Drop-InContact for price
View Datasheet →INA129UA/2K5
✅ Drop-In📋 Reference alternative (not in catalog)
INA128UAG4
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
AD620ARZ
✅ Drop-InContact for price
View Datasheet →INA129UAG4 Maximum Ratings & Electrical Characteristics
| Amplifier Type | Precision instrumentation amplifier |
| Number of Circuits | 1 circuit |
| Gain-Bandwidth Product | 1.3 MHz |
| Bandwidth at Gain 100 | 200 kHz |
| Gain Range | 1 to 10,000 |
| Input Offset Voltage | 25 µV typical |
| Input Bias Current | 5 nA typical |
| Input Protection Range | ±40 V |
| Minimum Supply Voltage | 1.8 V |
| Operating Temperature Range | -40°C to +85°C |
| Package | 8-SOIC, 0.154 inch width, 3.90 mm body width |
| Mounting Type | Surface mount |
| Architecture | Three-op-amp with current-feedback input circuitry |
| Gain Setting | External resistor |
INA129UAG4 Pin Configuration
| Pin 1 | RG — Gain resistor connection |
| Pin 2 | IN- — Inverting input |
| Pin 3 | IN+ — Noninverting input |
| Pin 4 | V- — Negative supply connection |
| Pin 5 | REF — Reference input |
| Pin 6 | OUT — Amplified output |
| Pin 7 | V+ — Positive supply connection |
| Pin 8 | RG — Gain resistor connection |
Typical Applications
INA129UAG4 is suitable for 6 applications: Strain-Gauge Bridge Front End, Low-Current Sensor Measurement, Biomedical Signal Acquisition, Industrial Process Monitoring, Laboratory Instrumentation, Battery-Powered Sensor Node.
Strain-Gauge Bridge Front End
The INA129UAG4 is well suited to differential bridge outputs because its three-op-amp architecture provides accurate gain, low 25 µV typical input offset, and 5 nA typical input bias current. Designers can set the closed-loop gain with an external resistor and obtain 200 kHz bandwidth at a gain of 100. This combination supports static load-cell measurements while retaining useful bandwidth for transient loading. The ±40 V internal input protection adds robustness when the bridge is connected through long industrial wiring. The reference pin should remain well decoupled, and the gain resistor should be placed directly beside pin 8 to minimize gain error.
Recommended
Low-Current Sensor Measurement
For low-current sensors, the INA129UAG4 combines a 5 nA typical input bias current with gains up to 10,000, allowing small differential currents to be raised to a measurable voltage level. Its low-power instrumentation-amplifier architecture is preferable to assembling several discrete precision amplifiers in a sensitive measurement channel. Gain-related error should be controlled with a suitable external resistor and clean reference connection. The 1.3 MHz gain-bandwidth product provides design margin when moderate signal bandwidth is required, while the 8-pin SOIC keeps the analog front end compact.
Recommended
Biomedical Signal Acquisition
The INA129UAG4 can amplify small differential signals in biomedical acquisition systems when the electrode or sensor interface meets its common-mode and input-range limits. The 25 µV typical offset and 5 nA typical bias current are relevant to low-level physiological measurements, while the three-op-amp topology reduces the number of separate precision amplifier stages required. Input protection up to ±40 V improves tolerance of transient events, although protection does not replace isolation or patient-safety circuitry. Designers should verify electrode bias, ground strategy, input filtering, and compliance requirements in the complete medical system.
Recommended
Industrial Process Monitoring
The INA129UAG4 fits process-monitoring channels that measure a small differential signal riding on a substantially larger common-mode voltage. Its instrumentation-amplifier configuration supports accurate gain control, while the 200 kHz bandwidth at gain 100 accommodates signals beyond DC without requiring the higher power and complexity of a discrete analog front end. The wide supply compatibility and ±40 V input protection can simplify connections to industrial sensor lines. Designers should still add appropriate filtering, surge protection, and grounding appropriate to the installation environment rather than relying on input protection as a complete surge solution.
Recommended
Laboratory Instrumentation
Laboratory instruments benefit from the INA129UAG4's ability to amplify small differential signals while rejecting common-mode voltage. Its programmable gain of 1 to 10,000 allows the same input stage to serve several measurement ranges, and the external gain resistor keeps the circuit straightforward to recalibrate or adapt. The 1.3 MHz gain-bandwidth product supports higher-bandwidth measurements, while the 8-pin SOIC package simplifies replacement and standardization across instrument channels. For precision bench equipment, add input filtering, account for resistor tolerance, and use a low-noise reference arrangement.
Recommended
Battery-Powered Sensor Node
The INA129UAG4's low-power design is useful in battery-powered sensor nodes that must resolve a small differential signal without continuously operating a high-bandwidth amplifier. The minimum 1.8 V supply permits integration with low-voltage sensor and processing platforms, while the SOIC-8 package supports compact assembly. Its 1.3 MHz gain-bandwidth product provides flexibility when the required measurement bandwidth is modest but nonzero. Energy use should be evaluated across the complete acquisition cycle, including the analog front end, ADC, processor, and any reference or filtering components.
Recommended
Recommended Products Summary
Engineering reference data for INA129UAG4 — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | INA129U | INA129UA | INA129UA/2K5 | INA128UAG4 | AD620ARZ |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Analog Devices |
| Package | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC |
| Product Type | Precision instrumentation amplifier | Instrumentation amplifier | Precision instrumentation amplifier | Precision instrumentation amplifier | Precision instrumentation amplifier | Instrumentation amplifier |
| Number of Circuits | 1 circuit | 1 circuit | 1 circuit | 1 circuit | 1 circuit | 1 circuit |
Key Differentiators
- Higher gain bandwidth than the AD620ARZ class (vs AD620ARZ)
- Lower-power precision instrumentation-amplifier architecture (vs AD620ARZ)
- Established same-package family options (vs INA128UAG4)
Design Notes
Connect the external gain resistor directly between pins 1 and 8, and keep the input traces short and symmetric. Route the two differential inputs away from switching-node copper and high-current return paths to preserve common-mode rejection. Place input filtering close to the relevant pins, but account for component tolerances and leakage in high-impedance sensor channels.
Use a clean, low-impedance connection for the REF pin. If the output must be centered above ground in a single-supply circuit, drive REF from a low-noise buffered reference and decouple it locally. Avoid floating REF unless the manufacturer permits that operating condition, because reference noise and impedance can otherwise degrade output accuracy.
Do not treat the ±40 V input-protection rating as the normal operating input range. Confirm the supported input common-mode range, maximum differential input, output swing, and supply limits for the selected gain and temperature. Also verify that the exact INA129UAG4 ordering configuration, rather than INA129U or INA129UA, matches the PCB, qualification, and assembly requirements.
Compliance Information
The INA129UAG4 is an industrial instrumentation amplifier; no automotive qualification is indicated by the available product information. Compliance attributes require confirmation from the manufacturer documentation.