INA129UAG4 vs AD620ARZ Comparaison
Comparaison détaillée côte à côte de INA129UAG4 par Texas Instruments et AD620ARZ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
INA129UAG4 - 1.3MHz Precision Instrumentation Amp | Texas Instruments
INA129UAG4 ✓ ActifAnalog Devices
AD620ARZ - Low Cost Low Power Instrumentation Amplifier | Analog Devices
AD620ARZ ✓ ActifComparaison des spécifications
| Paramètre | INA129UAG4 | AD620ARZ |
|---|---|---|
| Marque | Texas Instruments | Analog Devices |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Amplifier Type | Precision instrumentation amplifier | Instrumentation Amplifier |
| Number of Circuits | 1 circuit | 1 |
| Gain-Bandwidth Product | 1.3 MHz | — |
| Bandwidth at Gain 100 | 200 kHz | — |
| Gain Range | 1 to 10,000 | 1 to 10,000 |
| Input Offset Voltage | 25 µV typical | 50 µV |
| Input Bias Current | 5 nA typical | 1.0 nA |
| Input Protection Range | ±40 V | — |
| Minimum Supply Voltage | 1.8 V | — |
| Maximum Supply Voltage | [DATA_NEEDED: maximum supply voltage] | — |
| Plage de température de fonctionnement | -40°C to +85°C | -40°C to +85°C |
| Boîtier | 8-SOIC, 0.154 inch width, 3.90 mm body width | 8-SOIC (0.154", 3.90mm Width) |
| Type de montage | Surface mount | Surface Mount |
| Architecture | Three-op-amp with current-feedback input circuitry | — |
| Gain Setting | External resistor | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection ratio] | — |
| Input Offset Voltage Drift | [DATA_NEEDED: input offset voltage drift] | — |
| Courant d'alimentation | [DATA_NEEDED: supply current] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Supply Voltage Range | — | ±2.3 V to ±18 V |
| Supply Current (Max) | — | 1.3 mA |
| CMRR at Gain 10 | — | 100 dB |
| Bandwidth at Gain 10 | — | 120 kHz |
| Voltage Noise Density at 1 kHz | — | 9 nV/√Hz |
| Input Impedance | — | 10 GΩ |