INA137PA vs SSM2143PZ Comparison
Detailed side-by-side comparison of INA137PA by Texas Instruments and SSM2143PZ by Analog Devices. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Analog Devices
SSM2143PZ - Audio Differential Line Receiver, 90dB CMR | Analog Devices
SSM2143PZ ✓ ActiveSpecification Comparison
| Parameter | INA137PA | SSM2143PZ |
|---|---|---|
| Brand | Texas Instruments | Analog Devices |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Product Type | Single audio differential line receiver | — |
| Number of Channels | 1 channel | — |
| Fixed Gain | 1/2 (-6 dB) or 2 (+6 dB) | — |
| Supply Voltage Range | ±18 V | — |
| Total Supply Voltage | 36 V | — |
| Distortion | 0.0005% at 1 kHz | — |
| Slew Rate | 14 V/µs | 10 V/us typical |
| Common-Mode Rejection Ratio | 90 dB | — |
| Quiescent Current | 2.9 mA maximum | — |
| Settling Accuracy | 0.01% | — |
| Package | 8-pin PDIP | 8-PDIP (PZ), 0.300 in / 7.62 mm |
| Mounting Type | Through-hole | Through-Hole |
| Internal Resistors | On-chip precision resistors | — |
| Input Signal Type | Differential audio signal | — |
| Output Configuration | Single-ended | — |
| Gain Configurations | Resistor reversal selects -6 dB or +6 dB | — |
| Bandwidth | [DATA_NEEDED: bandwidth] | — |
| Input Impedance | [DATA_NEEDED: input impedance] | — |
| Output Impedance | [DATA_NEEDED: output impedance] | — |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Amplifier Type | — | Audio Differential Line Receiver |
| Number of Circuits | — | 1 |
| Nominal Gain (G = 1/2) | — | 0.5 (configurable to 2) |
| Output Type | — | Single-ended |
| -3 dB Bandwidth | — | 7 MHz typical |
| Common-Mode Rejection (DC) | — | 90 dB typical |
| Common-Mode Rejection (60 Hz) | — | 90 dB typical |
| Common-Mode Rejection (20 kHz) | — | 85 dB typical |
| Total Harmonic Distortion + Noise | — | 0.0006 % typical at 1 kHz; <0.004 % full audio band |
| Supply Current | — | 2.7 mA typical |
| Supply Voltage Range (Dual) | — | ±6 V to ±18 V |
| Supply Voltage Range (Single) | — | 6 V to 36 V |
| Maximum Differential Input | — | +28 dBu at G = 1/2 |
| Operating Temperature | — | -40 C to +85 C |