INA137PA vs SSM2143PZ Vergleich
Detaillierter Direktvergleich von INA137PA von Texas Instruments und SSM2143PZ von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Analog Devices
SSM2143PZ - Audio Differential Line Receiver, 90dB CMR | Analog Devices
SSM2143PZ ✓ AktivSpezifikationsvergleich
| Parameter | INA137PA | SSM2143PZ |
|---|---|---|
| Marke | Texas Instruments | Analog Devices |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | Single audio differential line receiver | — |
| Number of Channels | 1 channel | — |
| Fixed Gain | 1/2 (-6 dB) or 2 (+6 dB) | — |
| Supply Voltage Range | ±18 V | — |
| Total Supply Voltage | 36 V | — |
| Distortion | 0.0005% at 1 kHz | — |
| Slew Rate | 14 V/µs | 10 V/us typical |
| Common-Mode Rejection Ratio | 90 dB | — |
| Ruhestrom | 2.9 mA maximum | — |
| Settling Accuracy | 0.01% | — |
| Gehäuse | 8-pin PDIP | 8-PDIP (PZ), 0.300 in / 7.62 mm |
| Montageart | Through-hole | Through-Hole |
| Internal Resistors | On-chip precision resistors | — |
| Input Signal Type | Differential audio signal | — |
| Ausgangskonfiguration | Single-ended | — |
| Gain Configurations | Resistor reversal selects -6 dB or +6 dB | — |
| Bandwidth | [DATA_NEEDED: bandwidth] | — |
| Input Impedance | [DATA_NEEDED: input impedance] | — |
| Output Impedance | [DATA_NEEDED: output impedance] | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Amplifier Type | — | Audio Differential Line Receiver |
| Number of Circuits | — | 1 |
| Nominal Gain (G = 1/2) | — | 0.5 (configurable to 2) |
| Ausgangstyp | — | Single-ended |
| -3 dB Bandwidth | — | 7 MHz typical |
| Common-Mode Rejection (DC) | — | 90 dB typical |
| Common-Mode Rejection (60 Hz) | — | 90 dB typical |
| Common-Mode Rejection (20 kHz) | — | 85 dB typical |
| Total Harmonic Distortion + Noise | — | 0.0006 % typical at 1 kHz; <0.004 % full audio band |
| Versorgungsstrom | — | 2.7 mA typical |
| Supply Voltage Range (Dual) | — | ±6 V to ±18 V |
| Supply Voltage Range (Single) | — | 6 V to 36 V |
| Maximum Differential Input | — | +28 dBu at G = 1/2 |
| Betriebstemperatur | — | -40 C to +85 C |