INA137PA vs SSM2143PZ 비교

다음의 상세 나란히 비교: INA137PA 제조: Texas Instruments 및 SSM2143PZ 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

사양 비교

파라미터 INA137PA SSM2143PZ
브랜드 Texas Instruments Analog Devices
카테고리 Amplifier ICs Amplifier ICs
수명 주기 상태 활성 활성
Product Type Single audio differential line receiver —
Number of Channels 1 channel —
Fixed Gain 1/2 (-6 dB) or 2 (+6 dB) —
Supply Voltage Range ±18 V —
Total Supply Voltage 36 V —
Distortion 0.0005% at 1 kHz —
Slew Rate 14 V/µs 10 V/us typical
Common-Mode Rejection Ratio 90 dB —
대기 전류 2.9 mA maximum —
Settling Accuracy 0.01% —
패키지 8-pin PDIP 8-PDIP (PZ), 0.300 in / 7.62 mm
실장 유형 Through-hole Through-Hole
Internal Resistors On-chip precision resistors —
Input Signal Type Differential audio signal —
출력 구성 Single-ended —
Gain Configurations Resistor reversal selects -6 dB or +6 dB —
Bandwidth [DATA_NEEDED: bandwidth] —
Input Impedance [DATA_NEEDED: input impedance] —
Output Impedance [DATA_NEEDED: output impedance] —
동작 온도 범위 [DATA_NEEDED: operating temperature range] —
RoHS 상태 [DATA_NEEDED: RoHS status] Compliant
REACH Status [DATA_NEEDED: REACH status] —
Lead-Free Status [DATA_NEEDED: lead-free status] —
Amplifier Type — Audio Differential Line Receiver
Number of Circuits — 1
Nominal Gain (G = 1/2) — 0.5 (configurable to 2)
출력 유형 — Single-ended
-3 dB Bandwidth — 7 MHz typical
Common-Mode Rejection (DC) — 90 dB typical
Common-Mode Rejection (60 Hz) — 90 dB typical
Common-Mode Rejection (20 kHz) — 85 dB typical
Total Harmonic Distortion + Noise — 0.0006 % typical at 1 kHz; <0.004 % full audio band
공급 전류 — 2.7 mA typical
Supply Voltage Range (Dual) — ±6 V to ±18 V
Supply Voltage Range (Single) — 6 V to 36 V
Maximum Differential Input — +28 dBu at G = 1/2
동작 온도 — -40 C to +85 C

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청