INA141P vs AD621ANZ Comparison
Detailed side-by-side comparison of INA141P by Texas Instruments and AD621ANZ by Analog Devices. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
INA141P - Precision G=10/100 Low-Power Amplifier | Texas Instruments
INA141P UnknownSpecification Comparison
| Parameter | INA141P | AD621ANZ |
|---|---|---|
| Brand | Texas Instruments | Analog Devices |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Unknown | Active |
| Device Type | Precision, low-power instrumentation amplifier | — |
| Available Gain Settings | 10 and 100 V/V | — |
| Maximum Offset Voltage | 50 µV | — |
| Maximum Offset Drift | 0.5 µV/°C | — |
| Maximum Input Bias Current | 5 nA | — |
| Minimum Common-Mode Rejection | 117 dB | — |
| Input Protection | ±40 V | — |
| Supply Range | ±18 V | — |
| Architecture | Three-op-amp instrumentation-amplifier design | — |
| Bandwidth at Gain 100 | 200 kHz | — |
| Operating Temperature Range | -40 °C to +85 °C | -40°C to +85°C |
| Package | 8-pin plastic DIP | 8-pin PDIP (0.300 inch, 7.62 mm pitch) |
| Package Pin Count | 8 pins | — |
| Mounting Type | Through-hole | Through-hole |
| Low-Power Supply Current | [DATA_NEEDED: maximum quiescent current] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| Input Noise | [DATA_NEEDED: input noise specification] | — |
| Gain Error | [DATA_NEEDED: gain error] | — |
| RoHS Status | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | [DATA_NEEDED: automotive qualification status] | — |
| Product Type | — | Instrumentation Amplifier |
| Number of Circuits | — | 1 circuit |
| Packaging Type | — | Tube |
| Small-Signal Bandwidth | — | 800 kHz at -3 dB |
| Slew Rate | — | 1.2 V/µs |
| Maximum Supply Current | — | 1.3 mA |
| Input Bias Current | — | 500 pA |
| Input Offset Voltage | — | 75 µV |
| Output Type | — | [DATA_NEEDED: output type] |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Gain Range | — | [DATA_NEEDED: gain range] |
| Input Common-Mode Rejection | — | [DATA_NEEDED: input common-mode rejection] |
| Maximum Input Voltage | — | [DATA_NEEDED: maximum input voltage] |
| Halogen-Free Status | — | Compliant |