INA141P vs AD621ANZ 비교
다음의 상세 나란히 비교: INA141P 제조: Texas Instruments 및 AD621ANZ 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Texas Instruments
INA141P - Precision G=10/100 Low-Power Amplifier | Texas Instruments
INA141P Unknown사양 비교
| 파라미터 | INA141P | AD621ANZ |
|---|---|---|
| 브랜드 | Texas Instruments | Analog Devices |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | Unknown | 활성 |
| Device Type | Precision, low-power instrumentation amplifier | — |
| Available Gain Settings | 10 and 100 V/V | — |
| Maximum Offset Voltage | 50 µV | — |
| Maximum Offset Drift | 0.5 µV/°C | — |
| Maximum Input Bias Current | 5 nA | — |
| Minimum Common-Mode Rejection | 117 dB | — |
| Input Protection | ±40 V | — |
| Supply Range | ±18 V | — |
| Architecture | Three-op-amp instrumentation-amplifier design | — |
| Bandwidth at Gain 100 | 200 kHz | — |
| 동작 온도 범위 | -40 °C to +85 °C | -40°C to +85°C |
| 패키지 | 8-pin plastic DIP | 8-pin PDIP (0.300 inch, 7.62 mm pitch) |
| Package Pin Count | 8 pins | — |
| 실장 유형 | Through-hole | Through-hole |
| Low-Power Supply Current | [DATA_NEEDED: maximum quiescent current] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| Input Noise | [DATA_NEEDED: input noise specification] | — |
| Gain Error | [DATA_NEEDED: gain error] | — |
| RoHS 상태 | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | [DATA_NEEDED: automotive qualification status] | — |
| Product Type | — | Instrumentation Amplifier |
| Number of Circuits | — | 1 circuit |
| Packaging Type | — | Tube |
| Small-Signal Bandwidth | — | 800 kHz at -3 dB |
| Slew Rate | — | 1.2 V/µs |
| Maximum Supply Current | — | 1.3 mA |
| Input Bias Current | — | 500 pA |
| Input Offset Voltage | — | 75 µV |
| 출력 유형 | — | [DATA_NEEDED: output type] |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Gain Range | — | [DATA_NEEDED: gain range] |
| Input Common-Mode Rejection | — | [DATA_NEEDED: input common-mode rejection] |
| Maximum Input Voltage | — | [DATA_NEEDED: maximum input voltage] |
| Halogen-Free Status | — | Compliant |