INA141P vs AD621ANZ Comparaison
Comparaison détaillée côte à côte de INA141P par Texas Instruments et AD621ANZ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
INA141P - Precision G=10/100 Low-Power Amplifier | Texas Instruments
INA141P UnknownComparaison des spécifications
| Paramètre | INA141P | AD621ANZ |
|---|---|---|
| Marque | Texas Instruments | Analog Devices |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Unknown | Actif |
| Device Type | Precision, low-power instrumentation amplifier | — |
| Available Gain Settings | 10 and 100 V/V | — |
| Maximum Offset Voltage | 50 µV | — |
| Maximum Offset Drift | 0.5 µV/°C | — |
| Maximum Input Bias Current | 5 nA | — |
| Minimum Common-Mode Rejection | 117 dB | — |
| Input Protection | ±40 V | — |
| Supply Range | ±18 V | — |
| Architecture | Three-op-amp instrumentation-amplifier design | — |
| Bandwidth at Gain 100 | 200 kHz | — |
| Plage de température de fonctionnement | -40 °C to +85 °C | -40°C to +85°C |
| Boîtier | 8-pin plastic DIP | 8-pin PDIP (0.300 inch, 7.62 mm pitch) |
| Package Pin Count | 8 pins | — |
| Type de montage | Through-hole | Through-hole |
| Low-Power Supply Current | [DATA_NEEDED: maximum quiescent current] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| Input Noise | [DATA_NEEDED: input noise specification] | — |
| Gain Error | [DATA_NEEDED: gain error] | — |
| Statut RoHS | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | [DATA_NEEDED: automotive qualification status] | — |
| Product Type | — | Instrumentation Amplifier |
| Number of Circuits | — | 1 circuit |
| Packaging Type | — | Tube |
| Small-Signal Bandwidth | — | 800 kHz at -3 dB |
| Slew Rate | — | 1.2 V/µs |
| Maximum Supply Current | — | 1.3 mA |
| Input Bias Current | — | 500 pA |
| Input Offset Voltage | — | 75 µV |
| Type de sortie | — | [DATA_NEEDED: output type] |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Gain Range | — | [DATA_NEEDED: gain range] |
| Input Common-Mode Rejection | — | [DATA_NEEDED: input common-mode rejection] |
| Maximum Input Voltage | — | [DATA_NEEDED: maximum input voltage] |
| Halogen-Free Status | — | Compliant |