INA2137PA vs INA2134PA Comparison
Detailed side-by-side comparison of INA2137PA by Texas Instruments and INA2134PA by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
INA2134PA - Dual 0dB Audio Differential Receiver | Texas Instruments
INA2134PA ✓ ActiveSpecification Comparison
| Parameter | INA2137PA | INA2134PA |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Active | Active |
| Product Type | Dual audio differential line receiver | — |
| Channel Count | 2 channels | — |
| Nominal Gain Option 1 | 0.5 (-6 dB) | — |
| Nominal Gain Option 2 | 2 (+6 dB) | — |
| Package | 14-pin PDIP (N) | — |
| Mounting Type | Through-hole | Through-hole |
| Supply Voltage Options | 9 V, 12 V, 15 V, 18 V, 24 V, or 28 V | — |
| Input Configuration | Differential | — |
| Signal Category | Audio | — |
| Manufacturer | Texas Instruments | — |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | -40 °C to +85 °C |
| Supply Current | [DATA_NEEDED: supply current] | — |
| Input Voltage Range | [DATA_NEEDED: input voltage range] | — |
| Output Voltage Range | [DATA_NEEDED: output voltage range] | — |
| Frequency Response | [DATA_NEEDED: frequency response] | — |
| Noise Performance | [DATA_NEEDED: input noise voltage or noise density] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | 90 dB minimum |
| Bandwidth | [DATA_NEEDED: bandwidth] | — |
| Power Dissipation | [DATA_NEEDED: power dissipation] | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Number of Channels | — | 2 channels |
| Voltage Gain | — | 1 V/V (0 dB) |
| Architecture | — | Dual audio differential line receiver |
| Supply Voltage Range | — | -18 V to +18 V |
| Quiescent Current | — | 2.9 mA maximum |
| Total Harmonic Distortion + Noise | — | 0.0005% at 1 kHz |
| Slew Rate | — | 14 V/µs |
| Gain Resistors | — | On-chip precision resistors |
| Package Type | — | PDIP (N), 14 pins |
| Output Swing | — | [DATA_NEEDED: output voltage swing] |
| Settling Time | — | [DATA_NEEDED: settling time to 0.01%] |
| Input Noise Floor | — | [DATA_NEEDED: input noise floor] |
| Common-Mode Input Voltage Range | — | [DATA_NEEDED: common-mode input voltage range] |
| Input Impedance | — | [DATA_NEEDED: differential input impedance] |
| Output Impedance | — | [DATA_NEEDED: output impedance] |